User manual THOMSON CKT620FD

[. . . ] It is therefore marked with this logo to indicate that used appliances must not be mixed with other waste. Recycling of the appliances organised by your manufacturer will thus be undertaken in optimum conditions, in accordance with European directive 2002/96/CE relating to electrical and electronic equipment waste. Consult your city hall or your retailer to find the drop-off points for used appliances that is nearest to your home. -- We thank you for your help in protecting the environment. [. . . ] Use a lid as often as possible to reduce heat loss by evaporation. The rings are regulated automatically; they switch on and off to maintain the selected power level. the temperature thus remains uniform and appropriate for cooking your food. The regulation frequency varies according to the selected power level. 1 -Only available when the hob is switched off 2push 0 until "0" is displayed and hold B Power keys - + for each cooking zone. You cannot use the independent timer whilst the cooking zones are switched on. Use the button to select the cooking zone for which you would like to use the timer. - Press keys - + of the cooking zone you wish to use to adjust the power level. To stop a ring press simultaneously for seve+ ral seconds keys "+" and "-" or key "-" until 0. To stop all the rings of the hob use key For the TV 682 model power is indicated by a flashing light The additional cooking zone can be used only when the main heating zone is in operation. to switch it on: When switching on: - Setting the power level. - Press the touch control , a beep will confirm your action, alternatively the power E setting and an "E" will be displayed, adjust the power if necessary. To switch it off: - Press the touch control , a beep will confirm your action. When you have finished cooking, the cooking zone turns itself off, the timer shows 0 and a beep sounds. 5 - Press the "+" or "-" touch controls to stop + this beeping. This display disappears after a few seconds, The LED above the lock key is unlit. Pressing this LED for a short time causes the LED to light up. The LED is displayed when you press an on/off key in any zone. [. . . ] Use a scraper for glass to remove the large bits, follow with the rough side of a disinfectant sponge, and then wipe off. Apply warm white vinegar to the stain, let stand, then wipe with a soft cloth. Apply a cleaning agent for vitroceramic glass (preferable one with silicone for its protective properties) to the surface. The hob does not operate and the indicator lights on the control panel do not light up. [. . . ]