User manual THRUSTMASTER FERRARI GT EXPERIENCE

[. . . ] - In “1 Player” mode: If your official gamepad is turned on, you will have to switch it to “controller port 2” in order for your wheel to be functional. - On PlayStation® 3, the wheel is only compatible with PlayStation® 3 games (and will not function with PlayStation® 2 games). - On PlayStation® 3, vibration effects on the wheel are not supported (only on PC). [. . . ] (You must repeat this procedure each time you restart or disconnect your wheel) 5/10 Steps 1  Erasing your programming Action LED color Press and hold for 2 seconds: TURNS OFF THEN ON SE + ST (5) AGAIN Your programming has now been erased. CONFIGURING THE PEDALS ON PLAYSTATION® 3 On Playstation® 3, your wheel’s accelerator and brake controls are in “separate” mode by default, meaning that the pedals function on independent axes: “Accelerator” = “R2” trigger & “Brake” = “L2” trigger For a different type of control (to limit skidding, for example), you can switch your wheel to “combined” (2 axes) mode: the pedals then function on a single axis. - On PlayStation® 3: “Accelerator and Brake” = Up/Down direction on “Right mini-stick”  Setting “Combined Pedals” mode Action Simultaneously press and release: the 2 pedals (13) + the “Home” button (6) LED color GREEN Your pedals are now combined (You must repeat this procedure each time you restart or disconnect your wheel) 6/10  To return to “Separate Pedals” mode (the default mode) Action LED color Simultaneously press and release: the 2 pedals (13) + the “Home” button (6) On PlayStation® 3 RED Your pedals have now returned to the default mode: “Separate” CONFIGURING THE PEDALS ON PC Your wheel’s accelerator and brake controls are in “separate” (3 axes) mode by default, meaning that the pedals function on independent axes. 3 axes mode allows you to considerably improve the precision of your driving. If your game does not support 3 axes mode, your wheel’s pedals will not function properly. You will then have to exit the game and select “combined” (2 axes) mode instead. mode Separate pedals (3 axes) Combined pedals (2 axes) LED color RED GREEN  Selecting axes via “Software” (This setting will be saved even after you restart or disconnect your wheel) On page 1 of the “Control Panel”: Select the mode you wish to use, then click OK.  Selecting axes via “Hardware” (This setting will not be saved: It must be repeated each time you restart or disconnect) (Allows you to select your mode directly in your game’s “Controls” options) Simultaneously press and release: the 2 pedals (13) + the “Home” button (6) 7/10 TROUBLESHOOTING AND WARNINGS  My wheel doesn’t function correctly or appears to be improperly calibrated: - Switch off your computer or your console, completely disconnect your wheel including all cables, then reconnect the wheel and restart your game. - If the problem persists on PC, download the “Thrustmaster Calibration Tool” manual calibration software available at the following address: http://ts. Com - Never move the wheel or pedals when connecting your wheel in order to avoid any calibration problems.  My pedal set does not work correctly: - Reconfigure your wheel in your game’s controller options section. - If the problem persists on PC, exit the game and switch the pedals to “combined” (2 axes) mode. You can then return to your game to reconfigure the wheel with the new axes.  I can’t configure my wheel: - On PS3: In your game’s “Options / Controller / Gamepads” menu: select the most appropriate configuration. - On PC: In your game’s “Options / Controller / Wheels” menu: select the most appropriate configuration. - Please refer to your game’s user manual or online help for more information. [. . . ] Where authorized by applicable law, the full liability of Guillemot and its subsidiaries (including for indirect damages) is limited to the repair or replacement of the Thrustmaster product. The consumer’s legal rights with respect to legislation applicable to the sale of consumer goods are not affected by this warranty. This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause not related to a material defect or manufacturing flaw; (2) in the event of failure to comply with the instructions provided by Technical Support; (3) to software not published by Guillemot, said software being subject to a specific warranty provided by its publisher. [. . . ]