User manual THRUSTMASTER FERRARI WIRELESS F430 COCKPIT

[. . . ] Compatible with: PlayStation® 3 & PC User Manual TECHNICAL FEATURES 1 2 rear clamp screws (to set the steering column angle) 2 Transport handle 3 Adjustable column of the base 4 Removable wheel 5 Power cord 6 1 front clamp screw (for setting the length) 7 Brake and accelerator pedals 8 Battery and receiver storage compartment 9 Up & Down gearshift paddles 10 Manettino with 5-position rotary switch (for programming) 11 “Select” and “Start” buttons 12 Multidirectional D-Pad 13 Action buttons 14 Wireless receiver 15 USB connector of the receiver 16 Receiver LED 17 PC/PS3 switch of the receiver 1/20 INSTALLING THE WHEEL ADJUSTING THE TILT AND LENGTH OF THE DRIVING POSITION - Slightly unscrew (anticlockwise) the 2 clamp screws (1) at the back of the base. - Adjust the angle of the base’s column (3) so that is suitable to you. - Then tighten (clockwise) the 2 clamp screws (1). 2/20 - Slightly unscrew (anticlockwise) the clamp screw (6) located at the front of the base’s column. [. . . ] €PC / PS3” SWITCH (17) OF THE RECEIVER This switch must always be set to the correct position before you connect your receiver to the USB port of your PlayStation® 3 or PC. LED AND RECEIVER LED (16) - Both LEDs are on = connection set up between the wheel and the receiver. - Both LEDs flash quickly = no connection between the wheel and the receiver. -All the LEDs on the Manettino are off = the wheel is in standby mode or off. - The LED flashes slowly and continuously = you must change the batteries. AUTOMATIC CALIBRATION OF THE WHEEL AND PEDALS - The centre of the wheel is preset as soon as you turn it on: it is therefore vital for the wheel to be perfectly aligned on its axis when you switch it on. - Nevertheless, you can manually adjust the centre of the wheel. To do this, position the wheel in perfect alignment with the centre, and then simultaneously press “SELECT + START + ENGINE START” (this operation must be carried out each time the wheel is switched on). - The steering of the wheel and the pedals automatically self-calibrate. 13/20 ADVANCED FUNCTIONS ADJUSTING THE WHEEL’S SENSITIVITY Your wheel’s steering has 2 sensitivity modes: - “Normal Sensitivity” (default mode and recommended on PC - requires setting on PS3) - “High Sensitivity” (default mode and recommended on PS3 - requires setting on PC) Setting “Normal Sensitivity” mode (default mode and recommended on PC) Action - Set the Manettino switch to the relevant icon. - Press the push button to confirm the function. Your wheel’s steering is now at Normal Sensitivity ON Setting “High Sensitivity” mode (default mode and recommended on PS3) Action - Set the Manettino switch to the relevant icon. - Press the push button to confirm the function. Your wheel’s steering is now more sensitive, especially at the centre ON CONFIGURING THE PEDALS Your wheel’s accelerator and brake controls are in “separate” mode by default, meaning that the pedals function on independent axes. This mode lets you considerably improve the precision of your steering. If you game does not support the “separate” mode, the pedal set of the wheel will not work correctly. You must therefore activate the “Combined” mode. SETTING Simultaneously press and release both pedals (accelerator and brake) + the PEDAL SET MODE SEPARATE (recommended mode for most games) COMBINED or DOES NOT FLASH FLASHES button. 14/20 CONFIGURING THE PEDALS ON PLAYSTATION® 3 Separate pedal set (default mode) Combined pedal set (must be set) - Accelerator = R2 trigger of the PS3 gamepad - Brake = L2 trigger of the PS3 gamepad - Accelerator = Up direction of the “right mini-stick” of the PS3 gamepad - Brake = Down direction of the “right mini-stick” of the PS3 gamepad CONFIGURING THE PEDALS ON PC Separate pedal set (default mode) Combined pedal set (must be set) - Accelerator = RZ axis - Brake = Y axis - Accelerator = Up direction of the Y axis - Brake = Down direction of the Y axis 15/20 PROGRAMMING THE WHEEL AND PEDALS Your wheel is fully programmable: - All the action buttons can be switched between themselves. - All the action buttons can be programmed onto the pedals or gearshift paddles. TWO PROGRAMMING MODES The button and the PRESET LED allow you to view the programming type chosen: AUTOMATIC (pre-programmed) or MANUAL (programmed by yourself). Simply pressing this button allows you to switch from one programming mode to another (even during a game). [. . . ] Where authorized by applicable law, the full liability of Guillemot and its subsidiaries (including for indirect damages) is limited to the repair or replacement of the Thrustmaster product. The consumer’s legal rights with respect to legislation applicable to the sale of consumer goods are not affected by this warranty. 19/20 This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause not related to a material defect or manufacturing flaw; (2) in the event of failure to comply with the instructions provided by Technical Support; (3) to software not published by Guillemot, said software being subject to a specific warranty provided by its publisher. Additional warranty provisions In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and external housing. [. . . ]