User manual THRUSTMASTER SANS FIL FERRARI GAMEPAD 430 SCUDERIA

[. . . ] To wake up your gamepad: press START or use the POWER ON/OFF switch (14). Set your receiver’s USB selector to the “PS3” position. Connect the USB connector to USB port #1 on the console. Switch on your gamepad using the POWER ON/OFF switch (14). [. . . ] - Works for the optical wheel but only on PC and in “7 axes” mode. PRESET button color Lit up green Lit up red Flashes red Press and release the button or direction onto which you wish to Lit up green place your function. Your “MANUAL PRESET” is now enabled and up to date (with the 2 functions switched). 7/12 EEPROM MEMORY • Your gamepad features an internal chip which saves all of your “MANUAL PRESET” programming (even when the gamepad is switched off or disconnected for a long period of time). You can save a different “MANUAL PRESET” for each platform used: PlayStation®3, PC 4 Axes and PC 7 Axes. • TO ERASE YOUR “MANUAL PRESET” Steps PRESET button color 1 Enable your “MANUAL PRESET” (8). Lit up green Flashes green 2 2 Press and hold the MAPPING button (7) for 2 seconds. Seconds Your “MANUAL PRESET” is now clear (and once again identical to the “AUTOMATIC PRESET”). Action RETURNING TO “FACTORY SETTINGS” You can erase all of your programming or settings: Steps Action MAPPING button color Press the MAPPING + SELECT + START buttons 1 Flashes blue 5 seconds simultaneously All of your “MANUAL PRESETS” (= PC + PS3) or settings are now clear. Note: this procedure will completely restart your gamepad (on PC, we therefore recommend that you do this outside of games). POSSIBLE USES IN GAMES The optical wheel (thanks to its technology and degree of rotation greater than that of any mini-stick) offers unparalleled precision and stability in all types of games: racing (ultra-precise steering), flying (rudder), action and FPS (progressive zoom), sports (measured shot, strength of hit), etc. The triggers (thanks to their progressive action and range of mechanical travel greater than that of any button) offer extremely precise control in all types of games: racing (progressive and independent acceleration and braking, handbrake), action and FPS (rate of fire, lateral movement), sports (measured pass or shot, strength of hit or jump, running speed), etc. SOME EXAMPLES AND TIPS: - There are numerous configuration possibilities, depending on the game you are playing. - In certain games (racing type), do not hesitate to test out the 2 sensitivity modes for your optical wheel (Normal or High) in order to optimize its precision and responsiveness. 8/12 DIFFERENT EXAMPLES ACCORDING TO TYPE OF GAME Action/Adventure (“Car” mode) Action/Adventure (“On foot” mode) Sports (“Ball game” type) Sports (“Golf” type) Car racing (“Simulation” type) Car racing (“Arcade/Rally” type) Flying (“Simulation” type) Flying (“Arcade/Action” type) 9/12 USING MORE THAN ONE “Ferrari Wireless Gamepad” AT THE SAME TIME (in Multiplayer mode) You can use up to 4 “Ferrari Wireless Gamepads” at the same time (in multiplayer mode). Channel detection is carried out automatically In case of error or to force the connection: press the CONNECT button on the receiver and simultaneously press the L2 + R2 + MAPPING buttons on your gamepad. TROUBLESHOOTING AND WARNINGS • My gamepad doesn’t function correctly or seems improperly calibrated: - In the event of malfunction due to electrostatic emission, exit the game, switch off your gamepad and disconnect the receiver from your console or your PC. To play again, reconnect the receiver, switch your gamepad back on and start the game again. - Never move the mini-sticks, the optical wheel or the triggers when connecting your gamepad (to avoid any calibration problems). - On PC, if the game does not accept “7 axes” mode (undesired effects), switch your gamepad to “4 axes” mode (the standard gamepad mode). € I can’t configure my gamepad in a game: - In your game’s “Options / Controller / Gamepad” menu: select the most appropriate configuration. - Please refer to your game’s user manual or online help for more information. [. . . ] Only batteries of the recommended type or similar type must be used. Batteries must be inserted with the correct polarity. The terminals of a battery must not be short-circuited. When the batteries are dead, remove them and place them in containers designated for collecting used batteries. [. . . ]