User manual TIMEX T307

[. . . ] Model T307 Preset Tuning Clock Radio with MP3 line-in and Nature Sounds CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK OF UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead in an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbols above are located at the back of the cabinet. CAUTION: To prevent electric shock, match wide blade of plug to wide slot. ATTENTION: Pour éviter les choc électriques. [. . . ] You can set the radio alarm, the nature sound/buzzer alarm, or both alarms. Press and hold the 2 Radio Alarm 1 Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will need to press the 2 Radio Alarm 1 Button again. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the wake time. Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator. After setting the radio alarm time, while the display is still flashing you will need to select the station. First, press the L Mode/DST Button to select a radio frequency. Next, select a station using the M Memory Set 1-6 Buttons. For more information on programming radio stations into memory, see the Programming Radio Station Settings section of this manual. Rotate the O Volume Thumbwheel to set the wake sound volume. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date is set, as shown in the "Auto-Set" and Manual Time and Date Settings section of the manual. While the display is still flashing, press the 9 Date/7-5-2 Button until the desired setting is shown. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 4 Enter Button. The Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set. Setting Alarm 2 for Nature Sounds/Buzzer 1. · Press the N Power/Sleep Button to turn the unit OFF. · Press and hold the L Mode/DST Button for 5 seconds to turn "DST" on. The LCD display will indicate "DST". [. . . ] Connect your MP3, Discman or other device into the P AUX Jack located on the right side of the unit with mini plug cord. Press the N Power/Sleep Button once to turn the unit ON and press the L Mode/DST Button to AUX 3. Turn on the external device and adjust the device output level or the Volume Thumbwheel to adjust the volume level. Press the 3 Off/Reset Button to turn the unit off. [. . . ]