User manual TISSOT ANALOG WATCHES WITH ALARM

[. . . ] * Analog Watches with alarm User's Manual 1 2 6 4 3 5 7 Display and functions Hour hand Minute hand Seconds hand Alarm hand Date indicator Alarm switch Crown with 3 positions (7) : I Neutral position (not pulled out) II Setting position for date (unscrewed*, half pulled out) III Setting position for time (unscrewed*, completely pulled out). * Models with a screwed crown: IA Initial position (screwed down, not pulled out) IB Neutral position (unscrewed, not pulled out) w w w. [. . . ] The crown must not be left in position III : this increases power consumption ! Rapid correction of the date Crown in position II The date can be corrected rapidly by turning the crown backwards (counter-clockwise). Setting the alarm time Crown in position II The alarm time is set by turning the crown forwards (clockwise). Switching ON / OFF the alarm Crown in position I OFF Neutral position: alarm off. ON Pulled out position: alarm on (confirmed by a beep). Care and maintenance We would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in fresh water and leave it to dry completely. Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields. To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT ® representative or retailer. TISSOT ® Quartz watches benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years in continuous use. Replacing the battery Once the battery has run flat, it must be replaced without delay by an approved TISSOT ® representative or retailer. [. . . ] * valid in the EU member states and in any countries with corresponding legislation. ww w. [. . . ]