User manual TISSOT CHRONOGRAPH WITH ALARM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TISSOT CHRONOGRAPH WITH ALARM. We hope that this TISSOT CHRONOGRAPH WITH ALARM user guide will be useful to you.
Lastmanuals help download the user guide TISSOT CHRONOGRAPH WITH ALARM.
Manual abstract: user guide TISSOT CHRONOGRAPH WITH ALARM
Detailed instructions for use are in the User's Guide.
[. . . ] When operating as a chronograph, this model is able to time events lasting up to 12 hours, displaying the results to the 1/100th of a second, and also provides you with the following functions: Standard STARTSTOP function ADD function (partial times) SPLIT function (intermediate times) LAP function (time per lap) Your chronograph also features an alarm function as well as a display showing month and date. To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter.
Usage / Settings
Models with a screwed crown You must first unscrew the crown into position IB before you can pull it out into position II or III. Important : After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant. Pushers Press briefly on the pusher to move the hands in increments. [. . . ] Turn the hour hand twice anti-clockwise (2 full turns). Return the setting crown to position I.
60
40
20
3
C
B
2
Setting the counters to zero
D
12
9
A
30
3
Crown in position II In exceptional circumstances, the counter hands may not be set at or return to the 0 position (12 o'clock). In this case, press each pusher to reset the hands concerned to zero: A Sets the 30 minute counter hand to zero B Sets the 60 second counter hand to zero D Sets the 12 hour counter hand to zero Note: Brief pressure on the pusher advances the hand incrementally. Extended pressure (>1 sec. ) on the pushbutton advances the hand rapidly.
20
6
10
14
40
60
57
20
C
B
Alarm
1
D
12
9
A
30
3
Crown in position I Select the «ALARM» (e. g. : AL/Am) by pressing pusher D for < 1 second. Notes : The display of the ALARM function in the left aperture of the digital display (AL) is automatically followed by the display of the alarm hours (left LCD aperture) and of the alarm minutes (right LCD aperture).
20
6
10
60
2
40
20
3
C
B
4
Activate the flashing of hours and minutes of the alarm by pressing pusher C for < 1 second. Correct the alarm minutes with pusher B. Crown in position I Once the hours and minutes of the alarm are set, activate or deactivate the alarm as follows : Return to « ALARM/DATE » mode by pressing pusher D for < 1 second. Select the alarm status « ON/OFF » by pressing pusher C for > 1 second. Notes : An audible signal indicates that the alarm is switched on (ON). You can also check that the alarm bell is working properly by pressing pusher D (alarm demo mode). When programming the alarm, ensure that the analog time (hands) matches the digital time (indicators on left/right sides). If the times indicated are not identical, please refer the paragraph entitled "Setting the time".
5
D
12
9
A
30
3
20
6
10
60
40
20
6
C
B
D
30
9
A
3
2
Chronograph (simple function)
The simple « chronograph function » enables you to measure isolated events. Crown in position I START/STOP STOP Reading the time Reset counters to zero Note: Before each timing operation, the chronograph hands must be reset to zero. . If necessary, refer to the paragraph entitled "Setting the counters to zero".
1
20
6
10
Ad
40
60
74
20
C
B
3
w w w. c h
3/4
124_EN / 08. 06
Chronograph with alarm
*
4
3
D
30
9
A
3
2
Chronograph (ADD function)
The ADD function enables you to measure consecutive events without having to reset to zero between each event. Each time recorded is simply added to the previous total. Crown in position I START STOP Reading the time RESTART STOP Reading the time Reset counters to zero
1
I
20
6
10
60
40
20
C
B
x
Chronograph (SPLIT function)
D
30
9
A
3
1 6
The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting the timing operation. When you restart, the hands « catch up » the lost time. Crown in position I START SPLIT Reading the time 1 RESTART (catchup) SPLIT Reading the time 2 RESTART (catchup) STOP Reading the last time Reset counters to zero
20
6
10
60
40
20
C
B
3
24
5
7
Chronograph (LAP function)
4
5
D
30
9 6 3
A
20 10
1 6
I
This function enables you to time individual laps of a race. [. . . ] Type : High impedance / SR 936 PW / Renata 394. Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following this procedure you will contribute to the protection of the environment and human health. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TISSOT CHRONOGRAPH WITH ALARM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TISSOT CHRONOGRAPH WITH ALARM will begin.
