User manual TISSOT MULTIFUNCTION WATCHES

[. . . ] : Selection Correction Push-piece functions Morning Evening Selecting the functions With the crown in neutral position, turn it forwards or backwards. The following information appears on dial in quick succession, depending on the direction of crown rotation, following a sequential order of 1 to 9 or 9 to 1 (gentlemen's models), or 1 to 8 / 8 to 1 (ladies' models) . 1 If no letter appears, time is displayed in the 24 hour mode, i. e. : Morning Evening 2 3 4 To change the display mode : ­ Press the crown twice. Neutral Local time H-M-S Seconds Date Day Date The selected function is identified by the alphabet symbol, which appears in the upper section of the dial. Timer Second time zone Chronograph ADD mode Chronograph SPLIT mode Alarm NB : The watch is equipped with an end-of-life (EOL) battery indicator, which operates by causing the digital display to flash. w w w. ch 2/4 123_EN / 08. 06 Multifunction Watches * Setting the time ­ Change the watch into 24 hour display mode. [. . . ] The numerals display for seconds is then reset to zero. ­ Check that the minutes display is showing exactly the right time. If needed, correct the time by plus/minus one unit. Correction of date and month ­ Select the function "Seconds - Date". Second time zone The watch is capable of displaying not only the local time but also the time in a second time zone. To do this : ­ Select the function "Time in a second time zone" (T2). The numerals displaying the time and minutes for the second time zone start to flash. ­ Pull out the crown. The seconds disappear and the numeral for the month appears alongside the date. ­ Turn the crown backwards or forwards : ­ a rapid rotation changes the month, ­ a rapid rotation turn changes the date. The month display disappears and the seconds display reappears. Note : Even if the month is not displayed while the watch is being used in normal mode, it is still necessary for it to be set correctly, otherwise the perpetual calendar will not function up to 2099 (only gentleman's model). To change these settings : ­ Turn the crown backwards or forwards : ­ Press the crown back down. NB : ­ The display showing seconds cannot be altered. This display is the same as the one for local time. ­ The time zone display is corrected in multiples of 1/2 hours (only gentleman's model). ­ Since the watch can operate in either 2 times 12 hour (AM-PM) mode, or in 24 hour mode, you must bear this in mind when reading the time shown for a second time zone. w w w. ch 3/4 123_EN / 08. 06 Multifunction Watches * Changing the time zone Whenever you change time zone or whenever daylight saving changes occur between winter and summer (and vice versa), you are able to advance or retract the time shown by the hands by anywhere between one and several hours without losing the display showing for minutes and seconds. To do this : ­ Select and display local time. The numerals for hours and minutes flash and the symbol T appears in the upper section of the dial (only gentleman's model). Using the alarm ­ Select the "Alarm" (AL) function. ­ Pull out the crown. ­ Display the desired time by turning the crown forwards or backwards (a rapid rotation changes the hours, a slow rotation changes the minutes). ­ Press the crown back down. The alarm is then set, with AL showing on the display. ­ Turn the crown backwards or forwards quickly. The hands advance or retract the time by one complete hour, and the digital time display changes to match this new setting. The display showing seconds continues to flash. Press the crown to set the time to the nearest second. Note : ­ Do not turn the crown in small increments after turning it quickly in order to change the time zone setting. ­ To the alarm, (de-)activate press the crown after first selecting the "Alarm" (AL) function. AL display = alarm set (armed) OF display = alarm not set (disarmed) ­ Press the crown down to stop the alarm. [. . . ] This cuts the electrical power supply to the motor, thereby extending battery life considerably. Replacing the battery Once the battery has run flat, it must be replaced without delay by an approved TISSOT ® representative or retailer. Type : Renata 396 / Service life : about 3 years. Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. [. . . ]