User manual TIVOLI AUDIO M1

[. . . ] 9 Mono/stereo setting; Menu; Adjust tone/EQ; Set the clock; Turn off the display. For example, do not use near a bathtub, in a wet basement, near a swimming pool, and the like. Do not expose this product to rain or moisture. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] If the audio ever sounds distorted, lower the volume level to avoid damaging the speaker. Adjusting the volume while the Model 10 is muted will cancel the muting. Use these same buttons to manually tune up or down when in FM or AM mode. Press and hold to move quickly through the frequencies. a “T” will show on the display to indicate manual tuning mode. It will take 2 or 3 seconds until the frequencies begin to change. 5 seconds and release to auto scan to the next station detected. The display will show “ ” when auto scanning in FM and “ ” when auto scanning in AM. ρ : Press to navigate back or forward through the menu. MENU/SELECT: Press to enter the main menu and press to select items within the menu. For more, see the section marked “Menu”. Some of the menu items can be accessed regardless of whether the Model 10 is on or off. The display will show “M” for mono or “ST” for stereo. €Mono” or “Stereo” will also be one of the fields shown when pressing the Info button on the remote. This setting also affects the headphone output. For more, see the section marked “FM/AM Reception”. menu: (Press the Menu/Select button briefly. Use the   buttons to navigate through the menu pages and the pq buttons to change the items within the menu. Treble: Use pq to adjust the treble and press Select to proceed to the next menu item. Bass: Use pq to adjust the bass and press Select to proceed to the next menu item. Balance: As the balance control has no effect when the Model 10 is set to Mono, this setting should remain in the center position, except when the optional Model 10 Speaker is connected and Stereo mode is selected via the remote control’s “Mono” button. Though we still recommend the center balance setting in Stereo mode, you may use the pq buttons to adjust the balance to your liking, and press the Select button. [. . . ] Utilisez pq pour sélectionner EQ on (toujours en fonction), EQ off (supprimé lorsqu’il est sélectionné, puis remis en fonction lorsque le Model 10 est éteint et rallumé) ou EQ always off (toujours supprimé). ADVARSEL: Pass på å holde produktet unna regn og fuktighet for å forebygge faren for brann eller elektrisk støt. For produktet som bruker strømtilførsel, må originalen erstattes med eksakt samme type dersom denne blir borte eller skadet. Som administrerende direktør og leder for forskning og utvikling i sitt tidligere selskap Cambrigde SoundWorks, har Tom Devesto vært ansvarlig for mangfoldige produktsuksesser på hjemmeunderholdning og -multimediamarkedet. [. . . ]