User manual TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100. We hope that this TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100 user guide will be useful to you.

Lastmanuals help download the user guide TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100.

Mode d'emploi TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100

Download

Manual abstract: user guide TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100

Detailed instructions for use are in the User's Guide.

 [. . . ] TJERNLUND PRODUCTS,  INC. 
1601 Ninth Street · White Bear Lake,  MN 55110-6794 PHONE (800) 255-4208 · (651) 426-2993 · FAX (651) 426-9547 Visit our web site · www. tjernlund. com

IN-FORCER OR HS-5 WHEEL REPLACEMENT KIT
WARNING: Disconnect power from IN-FORCER
TM

and equipment before installing new wheel. 
Motor assembly panel screws (2) in front Fan prover sensing tube fitting

OPTION 1 FOR IN-FORCER WHEEL REMOVAL (PREFERRED) 1. Remove access door screws on rear of IN-FORCER,  (See Diagram A).  [. . . ] Replace inlet collar on housing with tapered end towards wheel and secure access door. 
Blower assembly bolts (4)

4. 

Access door

5. 

Reconnect power supply. Run IN-FORCER and heating equipment through several heating cycles to verify proper operation. 

OPTION 2 FOR IN-FORCER WHEEL REMOVAL 1. Blower assembly may also be removed from IN-FORCER cabinet if preferred. Remove (2) motor assembly panel screws on front of IN-FORCER,  (See Diagram A). Remove Fan Prover sensing tube from motor assembly panel by loosening brass compression fitting. Remove (4) bolts which hold blower assembly to IN-FORCER cabinet. Carefully slide out blower assembly from IN-FORCER cabinet. Remove screws from wheel housing inlet collar and remove inlet collar. Loosen set screw(s) on wheel with allen wrench. Install new wheel making sure it is centered in blower housing. Tighten set screw(s) on flat of motor shaft. On model PAI-7 make sure key-way is in wheel hub.  [. . . ] 9. 

For technical assistance contact Tjernlund's Technical Customer Service at 1-800-255-4208; M-F 7:30 - 4:30 CST. P/N 8504085 Copyright © 2000 Tjernlund Products,  Inc.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TJERNLUND 950-0487 WHEEL KIT 8504085 REV. 0100 will begin.