User manual TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995. We hope that this TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995 user guide will be useful to you.

Lastmanuals help download the user guide TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995.

Mode d'emploi TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995

Download

Manual abstract: user guide TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995

Detailed instructions for use are in the User's Guide.

 [. . . ] TOOLS REQUIRED Pipe Cutter Adjustable Wrench Pipe Thread Sealant IMPORTANT: Shut off gas supply before attempting the following procedure. Remove the burner line,  pilot line and thermocouple from gas valve (thermostat). Disconnect burner assembly from water heater with burner line still attached.  [. . . ] Reconnect burner line,  pilot line,  and thermocouple to gas valve (thermostat). All gas piping shall be tested and inspected in accordance with NFPA 54,  ANSI Z223. 1,  part 4. This modification is acceptable per the American Gas Association (AGA) Report No: 916-1A. INSTALLATION AFTER PILOT SAVER INSTALLED

Step 7. NOTE:

P/N: 8504028

©1994 TJERNLUND PRODUCTS,  INC. 2,  9/95

PILOT SAVER (950-2061) INSTRUCTIONS EXISTING VP-2/3,  WHK-2 INSTALLATION
NOTES: 4 inches of STRAIGHT VERTICAL Burner line must be available between the gas valve (thermostat) and the burner assembly for proper installation of Pilot Saver kit. These instructions take the place of the Gas Solenoid Valve mounting instructions in VP-2/3 and WHK-2 manual. The 3/8" to 1/2" adapter fittings in Safety Controls Kit are not required. TOOLS REQUIRED Pipe Cutter Adjustable Wrench Pipe Thread Sealant IMPORTANT: Shut off gas supply before attempting the following procedure. Remove the Solenoid from the gas supply piping. Reconnect gas supply piping to gas valve (thermostat). Remove the burner line,  pilot line and thermocouple from gas valve (thermostat). Disconnect burner assembly from water heater with burner line still attached. Remove 3 inches of vertical burner line between flared end and burner assembly.  [. . . ] Install burner assembly into water heater. Reconnect burner line,  pilot line and thermocouple to gas valve (thermostat). All gas piping shall be tested and inspected in accordance with NFPA 54,  ANSI Z2231. 1,  part 4.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TJERNLUND 950-2061 PILOT SAVER KIT 8504028 REV 2 0995 will begin.