User manual TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099. We hope that this TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099 user guide will be useful to you.
Lastmanuals help download the user guide TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099.
Manual abstract: user guide TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099
Detailed instructions for use are in the User's Guide.
[. . . ] Similarly, caution must be exercised when artificial or paper roll logs are burned because of the large volumes of flue gas and smoke produced. If artificial logs must be used, burn only one or two at a time to determine whether or not the smoke output exceeds your stove's venting capacity. [. . . ] Using the enclosed template, drill (4) 7/32" holes for speed nuts and cut a rectangular hole for the Auto-Draft, (See Diagram A). Insert curved edge of the fan housing into the pipe in direction of airflow and secure to pipe with screws, (See Diagram B). CAUTION: Allow for a 1 to 2 foot distance between the Auto-Draft and the stove when mounting. Speed control or motor damage may result from heat if mounted too close to stove. WIRING DIAGRAM B
WIRING Electrical power from a grounded 120/1/60 source is required for the Auto-Draft. All wiring must be done in accordance with the National Electric Code (NEC) and applicable local codes. Extreme caution must be exercised to ensure that the radiant and convective heat generated by the stove and vent pipe does not damage the electrical wiring.
OPERATION Prior to lighting the wood in your stove, the Tjernlund Auto-Draft should be turned on with the speed control adjusted to the "H" position. After the draft is established in the smoke pipe, the fire may be lit and the speed control may now be adjusted to a lower setting. MAINTENANCE The Auto-Draft will continue to efficiently produce draft in your wood stove as long as the following maintenance is performed at suggested intervals. Depending upon the type of wood burned, the fan must be removed from the vent pipe and cleaned at least once per year. Soot and creosote build up must be removed from both the fan wheel and housing. The fan motor is permanently sealed and requires no oiling. [. . . ] This warranty gives you specific legal rights and you may also have other rights which may vary from State to State. Send all inquiries regarding warranty work to Tjernlund Products, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TJERNLUND AD-1 FOR WOOD OR COAL STOVES 8504012 REV A 1099 will begin.
