User manual TNB KNNB01

[. . . ] They contain important information on its safety, use and disposal. Familiarise yourself with all of these operating and safety instructions before using the product. Use this appliance only as described and only for the specified areas of application. Additionally, pass these instructions on to whoever might acquire the appliance at a future date. [. . . ] 12 14:48 Operating components 1 Turbo button 2 Motor unit 3 Lid 4 Sealing ring 5 Blade holder 6 Blade 7 Bowl 8 Appliance base GB Initial Preparations Unpacking ♦ Remove all components of the appliance and these operating instructions from the carton. ♦ Remove all packaging material. ™¦ Clean all of the components as described in the section "Cleaning and care". Disposal of the packaging The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. The recirculation of packaging into the material circuit saves on raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed as per the regionally established regulations. NOTICE ► If possible preserve the appliance's original packaging during the warranty period so that, in the event of a warranty claim, you can package the appliance ideally for its return. 12 14:48 GB Chopping 1) Place the bowl 7 in the appliance base 8. 2) Place the blade holder 5 with the blade 6 on the drive shaft in the interior of the bowl 7. 3) Prepare the items to be processed by cutting large pieces to a size that will fit in the bowl 7. 13) Lift the motor unit 2 from the lid 3 and remove it. –º To prevent injuries, exercise caution when handling the extremely sharp blade 6. Keep the blade 6 out of the reach of children. 12 14:48 14) Carefully pull the blade holder with the blade 6 out of the bowl 7. NOTICE ► Due to the grinding of hard and abrasive foodstuffs, the bowl 7 can take on a dull appearance over time. This is normal and does not influence the functioning of the appliance. NOTICE ► You can use the appliance base 8, after the processing of the foods has been completed, as a lid for the bowl 7, to help keep the food fresh for longer. –º Take the motor unit 2 and lid 3 off of the bowl 7. –º The blade holder 5 with the blade 6 can, if you wish, remain in the bowl 7. –º Disconnect the appliance base 8 from the underside of the bowl 7. You can now place the appliance base 8 on the bowl 7 and press it in the middle so that it closes the bowl 7. [. . . ] –  The bowl 7, the lid 3 and the blade holder with the blade 6 are dishwasher safe. –  Clean the sealing ring 4 and the appliance base 8 in water and add a mild detergent. Afterwards, rinse all parts with clean water so that no detergent residues remain. Ensure that everything is dryed thoroughly before reassembling the appliance. [. . . ]