User manual TNB MOOVE SYSTEM

[. . . ] Page 21 Changing the direction of rotation / unlocking the device. Page 21 Before first use Preparing the tool for use Cleaning and Maintenance. Page 23 GB 15 Introduction The following icons / symbols are used in this instruction manual: Read instruction manual!Keep children away from electrical power tools! [. . . ] One moment of carelessness when using the device can lead to serious injury. 18 GB a)  o not overload the device. Always D use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B)  o not use an electrical power tool if D its switch is defective. An electrical power General safety advice for electrical power tools tool that can no longer be switched on and off is dangerous and must be repaired. C)  ull the mains plug out of the socket P and / or remove the rechargeable battery before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent the device from unintentionally starting. D)  hen not in use always ensure that W electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. This will ensure that your device remains safe to use.  Safety advice relating to cordless drill drivers The inserted tool may  strike concealed electricity cables, therefore when working you must hold the electrical power tool by the insulated handle areas only. Contact with a live wire means that the metal parts of the electrical power tools may become live and this can result in an electric shock.  se and handling of the cordU less electrical power tool a)  harge a rechargeable battery unit C using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable General safety advice for electrical power tools / Before first use  ecurely support the workpiece. S A workpiece held in a clamp or vice is kept more securely in place than one held by your hand.  armful / noxious dusts generated from your H work represent a risk to the health of the person operating the device and to anyone near the work area.  o not drill any material containing D asbestos. H High reaction torques may occur momentarily during tightening or loosening of screws.  f the inserted tool jams, switch off the I electrical power tool immediately. Be prepared for high reaction torques as they may cause kickback. [. . . ]  Never use petrol, solvents or cleaning agents that might attack plastic. Q Service Have your device repaired  the service centre or by qualified at specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. If the plug or lead needs  be replaced, always have the to replacement carried out by the manufacturer or its service centre. [. . . ]