User manual TNB SKINS DECO SKNBG2

[. . . ] Adobe and Acrobat are registered trademarks of Adobe Systems Inc. The SD logo is a trademark of the SD Card Association. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. [. . . ] Press shutter-release button to play voice memo. Playback ends when voice memo ends or shutter-release button is pressed again. Play voice memo Change volume l (W)/ O (T) Zoom buttons control volume during playback. Press l (W) to lower volume, O (T) to increase. Volume can also be adjusted using Sound settings option in setup menu (Q 90). Press multi selector up or down to highlight option, press the center of the multi selector to select. · Select No to exit without deleting picture or voice memo. · Select [1] to delete voice memo only. · Select Yes to delete both picture and voice memo. Erase 1 image ?No Yes Delete picture or voice memo u Voice Memos Voice memo file names consist of an identifier ("DSCN" for memos appended to original pictures, "SND_" for memos appended to copies), a four-digit file number copied from the associated picture, and the extension ". WAV" (e. g. , "DSCN0015. WAV"). 43 Viewing Pictures on TV Using the EG-CP12 audio/video (AV) cable (E3200) or EG-CP11 video cable (E2200) included with your camera, you can connect the camera to a television or video-cassette recorder (VCR). Choosing a Video Mode The Video mode item in the camera setup menu offers a choice of NTSC and PAL standards (Q 94). Be sure that the standard selected matches that used in the device. 1 More on Playback Turn the camera off · Turn the camera off before connecting or disconnecting the AV/video cable. 2 Connect the AV/video cable to the camera · Open the interface connector cover and insert the black plug into the camera's interface connector. 3 Connect the AV/video cable to the television or VCR · [E3200] Insert the yellow plug on the AV cable into the video-in jack on the television or VCR and the white plug into the audio-in jack. If you have not changed the USB option in the camera setup menu from its default setting of Mass Storage, you must remove the camera from the system as shown below before turning the camera off or disconnecting the cable. Windows XP Home Edition/Windows XP Professional Click the "Safely Remove Hardware" icon ( ) in the taskbar and select Safely remove USB Mass Storage Device from the menu that appears. More on Playback Windows 2000 Professional Click the "Unplug or Eject Hardware" icon ( ) in the taskbar and select Stop USB Mass Storage Device from the menu that appears. Windows Millennium Edition (Me) Click the "Unplug or Eject Hardware" icon ( ) in the taskbar and select Stop USB Disk from the menu that appears. Windows 98 Second Edition (SE) In My Computer, click with the right mouse button on the removable disk corresponding to the camera and select Eject from the menu that appears. Mac OS X Drag the "NO_NAME" camera volume into the Trash. Mac OS 9 Drag the "untitled" camera volume into the Trash. Mac OS X Mac OS 9 47 Printing Pictures Pictures stored in the memory or on the memory card can be printed in the same way as pictures taken with a film camera. Using the Print set option in the playback menu, you can specify the pictures to be printed, the number of prints, and the information to be included with each print. Printing pictures Pictures can be printed as follows. · By printer or at a photo lab Pictures can be printed by inserting a memory card containing pictures into a printer or having prints made at a digital photo lab. If a print order has been created, the printer or photo lab must support DPOF. Pictures stored in the camera memory can be printed. They must be copied to the memory card (Q 79). Copy the pictures before creating a print order. [. . . ] · Subject is outside range of flash. · Exposure compensation is too low. 24 18 25 67 67 20 20 Pictures are too dark (underexposed) Pictures are too · Exposure compensation is too high. bright (overexposed) Pictures are out of focus · Subject was not in focus area when shutter-release button was pressed halfway. [. . . ]