User manual TOMTOM CARKIT IPHONE INSTALLATION GUIDE

[. . . ] You can rotate the holder and adjust the height of the holder to find the best position and orientation for your iPhone. To remove your iPhone from the car kit, first release the top of your iPhone by placing you thumb against the top of the car kit while gently pushing the back of your iPhone with your fingers. Lift and remove the iPhone from the car kit. Note: TomTom has designed the TomTom car kit for iPhone specifically for iPhone use and has taken every precaution to make sure you have the best possible user experience. TomTom does not accept any responsibility for any damages to devices used with this accessory. [. . . ] The declaration of conformity can be found here: www. tomtom. com/ legal. TomTom car kit Note: TomTom has designed the TomTom car kit for iPhone and TomTom car kit for iPod touch specifically for iPhone and iPod touch use and has taken every precaution to make sure you have the best possible user experience. TomTom does not accept any responsibility for any damages to devices used with this accessory. Please review our exact warranty on: www. tomtom. com/legal. WEEE directive This symbol on the product or its packaging indicates that this product shall not be treated as household waste. In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your 6 Addendum local municipal collection point for recycling. CE Marking This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment. FCC Information for the User This product contains a transmitter which must not be co-located or simultaneously operated in conjunction with any other transand on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation distance between the equipment and the receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the product range, can be obtained from an authorised dealer. If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by TomTom, the FCC may withdraw the user's right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: "How to Identify and Resolve RadioTV Interference Problems". [. . . ] This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom N. V. Copyright notices © 2010 TomTom N. V. , The Netherlands. [. . . ]