User manual TOPCOM PMR TT9500

[. . . ] σ INSTRUKCJA OBSŁUGI UŽÍVATEL’SKÝ MANUÁL NO FI IT PT CZ GR PL SK The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive. UK NL FR DE ES SE DK NO FI IT PT CZ GR PL SK The features described in this manual are published with reservation to modifications. 0 - 07/09 This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on : http://www. [. . . ] turn the “On-Off/Volume Knob” 1 fully counter clockwise. The clicking sound will indicate that the PMR radio is switched off. To check the channel activity use the monitor function ( See chapter “13. 6 Changing Channels • • • Press the -button 7 once, the current channel number flashes on the display. Press the - button 11 or the - button 10 to change the channel. Press the PTT - button 12 to confirm and return to stand-by mode. 2 Battery Charge Level/Low Battery Indication The battery charge level is indicated by the number of squares present inside the battery icon on the LCD Screen. Battery Full Battery 2/3 charged Battery 1/3 charged Battery empty When the battery charge level is low, the battery icon will flash and a beep will be heard to indicate that the batteries need to be replaced or recharged. 3 • • Adjusting Speaker Volume Turn the “On-Off/Volume Knob” 1 clockwise to increase the speaker volume. Turn counter-clockwise to lower the volume. 7 If no button is pressed within 5 seconds during setting, the unit will return to standby. CTCSS (Continious Tone Coded Squelch System) / DCS (Digital Coded Squelch) License free PMR radio's operating on the 446 MHz frequency band, like the Twintalker 9500 PMR, have 8 available radio channels. If there are many PMR users in your neighborhood, there is a chance that some of these users are operating on the same radio channel. To prevent that you receive signals from other users, sub-channels have been integrated. Two PMR radio's will only be able to communicate with each other when they are operating on the same radio channel and when they have selected exactly the same sub-channel. There are two kind of sub-channels : • Continuous Tone Coded Squelch System (CTCSS) • Digital Coded Squelch (DCS) When using CTCSS, a low frequency tone (between 67 and 250 Hz) will be transmitted along with the voice signal. There are 38 available tones to choose from. You are free to choose one of these 38 available tones. Due to filtering, these tones will generally not be audible so they will not disturb the communication. DCS is similar to CTCSS, but instead of sending a continuous tone of a selected frequency, a digital data transmission is added to the radio signal. This Digital Code is transmitted at a really low rate, around 134 bits per second (the code is 23 bits long). Only the PMR's of the latest generation will support DCS. [. . . ] Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven by presentation of the original or copy of the purchase receipt, on which the date of purchase and the unit-model are indicated. 2 Warranty handling A faulty unit needs to be returned to an authorized service centre including a valid purchase note and a filled in service card. If the unit develops a fault during the warranty period, the service centre will repair any defects caused by material or manufacturing faults free of charge, by either repairing or exchanging the faulty units or parts of the faulty units. [. . . ]