User manual TOPCOM WIRELESS KIT 108MBPS

[. . . ] 1 DHCP server is ON By default, your (Wireless) network adapter in the computer will be configured as DHCPclient : Obtain an IP address automatically. These settings should be verified : • Click Start button, then select the Control Panel Topcom Wireless Kit 108Mbps 3 ENGLISH Topcom Wireless Kit 108Mbps – Double-click the Network Connections Icon – Click the right mouse key on your connected network adapter and select Properties. – Double-click the Internet Protocol (TCP/IP). Set the IP and DNS options as in screen above (DHCP client) : Obtain an IP address automatically Obtain DNS server address automatically – Click OK to confirm. [. . . ] PPTP : Some cable providers use the PPTP protocol to get connected to the Internet. This information will be provided by your ISP. – 12 Click Next to proceed. Topcom Wireless Kit 108Mbps Topcom Wireless Kit 108Mbps • L2TP : Some cable providers use the L2TP protocol to get connected to the Internet. This information will be provided by your ISP. eNGLISH 13 – Click Next to proceed. Wireless Settings Now the Wireless setup screen will appear : • Please enter the Wireless Network name (SSID). Topcom Wireless Kit 108Mbps Topcom Wireless Kit 108Mbps Wireless Encryption In this wizard, you have the option to enable WEP encryption. topcom strongly recommends to enable encryption. This is the only way to prevent that unwanted users access your wireless network. If you want to use WPA / WPA-PSK encryption, you should access the Wireless section in the menu to set it up, after you have finished this wizard. €¢ • • Select WEP to activate WEP encryption Select the WEP Encryption type : 64 bit or 128 bit. Enter the WEP key : – 10 hex digits for 64 bit encryption – 26 hex digits for 128 bit encryption HEX digits to be used : 0. Please wait for following screen to appear : – Click Close Topcom Wireless Kit 108Mbps 15 Topcom Wireless Kit 108Mbps 5 Check the connection status Click WL108-ROUTER in the menu to show the device information screen: In the WAN section you can see the WAN IP address. In the Wireless section you will see the configured SSID, channel and Encryption type. The wireless speed of a standard IEEE802. In the Advanced menu, the performance of the Wireless LAN can be configured in Super G mode (108 Mbps). Open the Home menu and select Wireless SuperG with Dynamic Turbo will provide the fastest wireless speed. €“ Click Apply 16 Topcom Wireless Kit 108Mbps Topcom Wireless Kit 108Mbps 7 8 Other settings Firmware update ENGLISH 17 For other settings, please go to the full userguide on the provided CD. When a new firmware is released, it will be published on the Topcom website downloads section. Net) in the support Please download the image and go to Tools in the router menu. €“ Click Browse to select the downloaded firmware image and click the Apply key. [. . . ] If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge. Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit. The initial purchase date shall determine the start of the warranty period. [. . . ]