User manual TORNADO PLEIN AIR 20

[. . . ] 1 2 OPERATING YOUR CLEANER 2-1 POWER CORD NOTE When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress. 2-2 HANDLE CONTROL TYPE ONLY · SLIDE TO THE STOP POSITION Vacuum-cleaner switches off (stand by mode) · SLIDE FORWARD TO MAX Suction capacity increases smoothly up to maximum. 2-3 USING CYCLONE FILTER 2 2-4 USING FLOOR TOOLS OPTION CREVICE DUSTING UPHOLSTERY OPTION PARQUET SPECIALIST - TRANSPARENT TUBE (OPTIONAL) HARD FLOOR 3 CHECK FILTER INDICATOR When the light is illuminated, check the Cassette Filter and clean it. OPTIONAL (Dust Bag type) Check the Dust bag and change it. 3 4 MAINTAINING THE CASSETTE FILTER 4-1 EMPTYING THE CASSETTE FILTER(Optional) 1 2 3 - Recommended as regular maintenance to ensure optimum running conditions and life of Cleaner. 6 5 4 · Ensure completely dry before replacing. · Allow 12 hours for it to dry. · Brush the Filter media with water until the stuck fine dust is removed. 7 8 9 NOTE The cassette filter should be washed thoroughly as well as emptied if: · the CHECK FILTER indicator lights continuously · the suction power feels weaker than normal · the Turbo Brush (optional) is not working properly 4 4-2 CHANGING THE DUST BAG (Optional) - Dust bags should be changed regularly. 1 2 3 VP-95B TYPE OPTIONAL FOR CLOTH FILTER BAG After using, if the cloth bag is full of dust, empty the bag and wash it either on a normal cycle in the washing machine or by hand, let it dry completely and them use it again. 5 CLEANING THE CYCLONE FILTER (Optional) - Recommended as regular maintenance of Cleaner. 1 2 3 4 5 6 7 8 NOTE It is necessary to use Cyclone Filter while cleaning. - CLEANING THE INNER PART OF CYCLONE FILTER 5 6 CLEANING THE INLET FILTER 1 2 - This filter is not washable. [. . . ] Nozzle, suction hose or tube is blocked. Check that the cord is not twisted or wound unevenly. Leave to cool, check filters empty/wash as required. Remove the object and empty/wash cassette filter as required. Pull the cord out 2-3m and push down the cord rewind button. Check hose and replace if required, Check filters and empty/wash if required. Suction force is gradually decreasing. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not block the suction or the exhaustion part. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the plug to disconnect cord from the electrical outlet before caring Cassette Filter and filters. [. . . ] The plug must be removed from the socket out-let before cleaning or maintaining the appliance. The use of an extension cord is not recommended. [. . . ]