User manual TORNADO T7755 INSTALLATION INSTRUCTIONS

[. . . ] 27 Replacing the "Super Air Clean" filter . 28 Replacing the "Active Air Clean" filter and the "Active HEPA" filter . 30 When to change the dust compartment filter . 45 3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE The manufacturer cannot be held responsible for any damage caused by non-compliance of these Important Safety Instructions. WARNINGTo reduce the risk of fire, electric shock or injury: Before using Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. [. . . ] For vacuuming smooth floors: ^ Press the foot switch marked ä. Floor tool Turbobrush / Powerbrush ACCU NOVA / Powerbrush SEB 217-3 or SEB 236 Models may come with any of these accessories (see "Optional accessories"). Please refer to the separate operating instructions supplied with these brushes for instructions on use and maintenance. 12 Included accessories The following accessories are included: a Crevice nozzle b Dust brush with natural bristles c Upholstery tool d Filter frame The filter frame is supplied only with those models which are fitted with an "ACTIVE air clean" or "HEPA" exhaust filter as standard. The filter frame is required to replace one of these filters with a "Super Air Clean" filter (see "Maintenance and care - Exchanging Exhaust Filters"). Taking the accessories out ^ Press the release button. The accessory compartment lid opens. ^ Take out the accessory needed. ^ Close the lid securely. 13 Included accessories Crevice tool For cleaning in folds, crevices and corners. Dust brush with natural bristles For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush swivels and can be turned to attain the best cleaning position. 14 Included accessories Upholstery tool For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Standard floor brush The standard floor brush can be used for normal cleaning of carpets, rugs, hard surfaces, carpeted stairs, etc. The comfort handle is shown as an example for all handles and may differ from your individual model. 15 Use Power cord , Unwind the cord completely to aid the vacuum in dissipating heat. Unwinding ^ Hold the plug and pull out the power cord. , To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Danger of overheating and damage. Rewinding ^ Unplug the vacuum from the outlet. Checking the dustbag change indicator ^ Attach the floor tool to the vacuum cleaner. Perform this test with the floor tool only, since other attachments can affect the function of the dustbag change indicator. ^ Turn the vacuum cleaner on and select the highest power setting. ^ Lift the floor brush slightly off the floor. If the marker completely fills the indicator window, the dust bag needs to be changed. How the dustbag change indicator works The dustbag change indicator is designed to show when the bag is full of common household dust and measures the amount of air flow through the dustbag. Normal household dust is a mixture of dust, hair, carpet fluff, threads, sand, etc. However, if fine dust, such as drill dust, sand, plaster or flour is vacuumed, the pores of the dustbag may become blocked. The marker will indicate that the bag is "full" even when it is not. The dustbag should be changed as the suction power is greatly reduced. If the bag is bulging with pet fur, hair, carpet fluff, etc. the indicator may not register "full". [. . . ] ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum. 35 Optional accessories Some models come equipped with one or more of the following accessories. Powerbrushes Observe the cleaning instructions of the floor manufacturer. Models designed for use with a Powerbrush have a release button on the cover cap to the connection socket. To use a powerbrush the SES 119 or SES 130 electrical hose and SET 210 electric wand must be obtained. [. . . ]