User manual TOSHIBA 15DLV76

[. . . ] Introduction 2 15-inch Diagonal LCD TV/DVD COMBINATION * Connections 14 Basic setup 21 TV operation 23 15DLV76 OWNER'S MANUAL Basic playback 31 Advanced playback 34 Function setup 46 Others 53 ©2006 Toshiba Corporation Before operating the unit, please read this manual thoroughly. *Screen size is approximate. J5X00221A [E] (Cover) 1 21/02/2006, 8:36 PM Introduction The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] TREBLE: Press or to adjust the treble sound. BALANCE: Press or to obtain an equal sound level from both speakers. SURROUND: Press or to select "ON" or "OFF". ON: The dynamic presence and sound created offers a thoroughly enjoyable listening experience. OFF: Normal sound. Listening to SAP (Second Audio Program) Repeat step 1 in "Sound control adjustment" on or to select "MTS". left, then press or to select "SAP". Then press When the TV is turned on or a channel selection is made, the "SAP" will appear on the screen. This means that the Second Audio Program broadcasting is available. 3 Press CANCEL to clear the menu screen. CANCEL STEREO SAP I To return BASS/TREBLE/BALANCE control adjustments to the factory preset levels or to select "RESET", then press . Press 30 J5X00221A [E] (P26-30) 30 21/02/2006, 8:41 PM Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious personal injury. DVD VCD CD POWER VOLUME +/­ PLAY STOP EJECT Basic playback Preparations: · When connecting to other equipment, turn the power off. 1 Press POWER on the unit or on the remote control to turn on the unit. The Power indicator on the front of the main unit will light. · Every time you press POWER, the TV/DVD starts from TV mode. · When using an amplifier, switch on the amplifier. 4 On the TV-screen, "0" changes to "Reading" and then playback commences. Reading Basic playback 2 Press TV/DVD on the remote control to select DVD mode. The DVD startup screen will appear on the screen. · A menu screen will appear on the TV screen if the disc has a menu feature. Press / or / to select title, then press ENTER. Title is selected and play commences. 5 3 Load a disc in the disc slot. Press VOLUME + or ­ to adjust the volume. VOLUME 32 6 Load the disc in the disc slot with the label side facing forward. (If the disc has a label. ) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. Press STOP to end playback. I Resuming facility · The unit records the stopped point, depending on the disc. Press PLAY to resume playback (from the scene point). · If you press STOP again ("I" appears on the screen. ), the unit will clear the stopped point. I To start playback in the stop mode Press PLAY. Note: If the unit does not operate properly: Static electricity, etc. , may affect the TV/DVD's operation. In such case, disconnect the AC cord, then connect it again. 31 J5X00221A [E] (P31-35) 31 21/02/2006, 8:41 PM Basic playback Playing a disc (Continued) To obtain a higher quality picture Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28). POWER TV/DVD EJECT VOL +/­ ENTER /// PAUSE PLAY STOP About DVD VCD CD The DVD VCD CD icons on the heading bar show the playable discs for the function described under that heading. [. . . ] DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. Rental Units The warranty for LCD TV/DVD Combination rental units begins on the date of the first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first. Commercial Units LCD TV/DVD Combinations sold and used for commercial purposes have a limited warranty for all parts and labor, which warranty begins on the date of original retail purchase and ends on the date that is ninety (90) days thereafter. Owner's Manual and Product Registration Card Read this owner's manual thoroughly before operating this LCD TV/DVD Combination. [. . . ]