User manual TOSHIBA 20AS25

[. . . ] 20AS25 J3M21821A(E)_ COVER 1 01/12/2004, 12:19 PM Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Child Safety It Makes A Difference Where Your TV Stands Congratulations on your purchase!As you enjoy your new TV, keep these safety tips in mind: Safety Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Issue If you are like most consumers, you have a TV in your home. [. . . ] As the sound level increases, so do the number of BARS AND THE NUMBER on the screen. The same is true for decreasing the level. DIRECT CHANNEL SELECTION buttons (09) - Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel. TV MODE DIRECT CHANNEL SELECTION - When the TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press "0, " then "2. " If you press only "2, " channel selection will be delayed for a few seconds). For channels 10 and above, press the two digits in order. 3 Set the TV/CABLE menu option to the appropriate position. When shipped from the factory, this menu option is in the CABLE setting. See "TO MEMORIZE CHANNELS" on page 9. TV - VHF/UHF channels CABLE - CABLE TV channels CABLE mode direct channel selection When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows: 1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002. " Press "0", then remaining 2 digits. Example, to select channel 12, press "012. " Press the 2 digits in order. Example, to select channel 36, press "36. " Press the 3 digits in order. Example, to select channel 120, press "120. " 4 CH (CHANNEL) + and buttons Press and release CH (CHANNEL) + or . The channel automatically stops at the next channel programmed into the TV's memory. Press and hold the button down to change channels more quickly. 10-12 13-99 100-125 For proper operation, make sure you program channels into the TV's memory before tuning channels. See "TO MEMORIZE CHANNELS" on page 9. NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes. 8 J3M21821A(E)_ P08-12 8 01/12/2004, 12:19 PM TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting. TO ADD/DELETE CHANNELS 1 2 3 Press MENU. Press SET + or until the indicator next to "CH SETUP" begins to flash, then press ENTER. [. . . ] Make sure channels are set into memory. Station is weak; adjust antenna to receive desired station. Check for sources of possible interference. Horizontal or diagonal bars Check antenna connections; reorient antenna. Check for sources of possible interference. [. . . ]