User manual TOSHIBA 27WL46

[. . . ] ingilizce-1. FH11 6/7/05 12:13 PM Page 1 ingilizce-1. FH11 6/7/05 12:13 PM Page 2 sorting ENGLISH -3- ingilizce-1. FH11 6/7/05 12:13 PM Page 3 ENGLISH -4- ingilizce-1. FH11 6/7/05 12:13 PM Page 4 will 2X10 W 800 PAP (Picture and Picture) Feature 3 DVI-D socket ENGLISH -5- ingilizce-1. FH11 6/7/05 12:13 PM Page 5 Safety Instructions - For Your Safety TO FULLY DISCONNECT THE TV, THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHALL BE READILY OPERABLE. ENGLISH -6- ingilizce-1. FH11 6/7/05 12:13 PM Page 6 Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady It should then be secured to the wall with a sturdy tie using the clip on the back of the television, or secured to the platform. The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. [. . . ] Quick Setup In the Setup menu use the down ( ) button to sellect the Quick Setup line and press "OK" or the right/left buttons. Here, after making your Language and Country choice and pressing the OK button, Auto Tuning will become active. The channels will be searched automatically and those with broadcasting will be saved from the first program into memory. At this point, the auto program menu appears showing an indication that displays the position of the auto tuning bar and the auto programme operation as well as the system, channel number of the existing channels and, if present, their station name. To stop the process at any given time, press the "EXIT" button. Quick Setup Select Your Language Select Your Country Press OK to start Auto Tune Language Country Watch TV English England Start The setup of your television Setting up the Sound Menu You can set the volume with the " +" and "­" buttons on the television or the ( ­ / + ) buttons on the remote control. You can control the other sound settings by entering the Sound menu For this application all you need to do is press the MENU button of your remote control. Press the "OK" or ( ) button selecting the direction button on the Sound menu bar The Sound menu appears on the screen. Using the up/down movement buttons ( / ) you can choose the features that you require. SOUND Balance Sound type Effect Volume Correction Headphone Back Watch TV Mono Spatial On Balance: To adjust the volume balance between the left and right speakers to the desired level, select the Balance bar using the down ( ) button. Balance: To adjust the volume balance between the left and right headphone to the desired level, select the Balance bar using the down ( ) button. Use the left/right button ( ­ / + ) to make adjustments. Bass: You can adjust the bass levels of the sound you hear in the headphone. Treble: You can adjust the treble levels of the sound you hear in the headphone. Sound Type: The program you watch might be stereo or in two different languages. Using the right/left keys ( ­ / + ) in this menu you can select Mono/Stereo or Dual-I/Dual-II language. Please note: The sound and headphone adjustments made will be stored without any additional transactions necessary. Picture Set up By pressing the MENU and "OK" or ( ­ ) button on your remote control please enter the Picture menu. Select the setting function you want using the Up and down buttons ( ) and adjust their levels with the right and left buttons ( ­ / + ). The picture brightness, contrast, color and sharpness levels can all be adjusted according to your desire. The changes you make in the picture settings will be automatically stored without any further transactions necessary being your Personal settings. Furthermore, you can select one of the non-adjustable default settings in the memory ) button on (Picture Mode) by pressing the ( your remote control. Picture Mode1, 2 and 3 are preset values. Picture Mode M is the value you store in the memory. ENGLISH -16- ingilizce-2. FH11 6/7/05 12:14 PM Page 1 Widescreen viewing AUTO: Automatic format selection dependant on transmission. ENGLISH -17- ingilizce-2. FH11 6/7/05 12:14 PM Page 2 Features Automatic Size Some channels broadcast with the program also size information. If you choose Open for the Automatic Size feature the TV will adjust to the size information broadcasted. To detect Automatic Size, the screen setting needs to be at Auto Mode. [. . . ] Press the right/left ( ­ / + ) buttons after you yellow highlighted the PIP Size selection. After you resized your PIP window you can exit the menu by pressing the EXIT button of the remote control. Entering the PAT Mode When the PIP button is pressed during Teletext mode you will enter the PAT mode. To exit this mode you only need to press the PIP button or the EXIT button. Selecting PIP Channel Swap PIP picture with main picture. PIP Position This feature enables you to position your PIP window. [. . . ]