User manual TOSHIBA 37LX96

[. . . ] 19 Advanced Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Stable Sound® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Dynamic Range Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Audio Level Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use b to highlight Stable Sound then press C or c to select On or Off. b a b Select the SOUND menu. Press b to highlight Bass, Treble or Balance and C or c to change the setting. Dynamic Range Control This feature allows control of audio compression for some digital TV programmes except MPEG-1 and MPEG-2 audio. a b In the SOUND menu, press b to highlight Dynamic Range Control. Press C or c to select On or Off. NOTE: If the Stable Sound and Dynamic Range Control features are both set to On, each effect may not be noticeable. 19 CONTROLS AND FEATURES English Audio Level Offset It tends to change into loud volume when switching from a DTV 5. 1ch to a DTV 2ch, an ATV or an external input. Using the Audio Level Offset feature reduces these volume differences. Audio description Audio description is an additional narrative sound track for visually impaired people to understand and enjoy the story line more fully. If this function is activated by pressing AD button, when the programme has such signal, the word AD will be displayed in the Channel Banner. You can select sound from speakers or headphone as you desire. a b c d Set the volume level usually used when watching DTV 5. 1ch programme. Tune to a channel which is DTV 2ch or ATV, or an external input. In the SOUND menu, press b to highlight Audio Level Offset and press Q. Press b to highlight an option, then use C or c to adjust the volume level. Audio Level Offset DTV 2ch ATV External Input -5 0 0 a b From the SOUND menu select Audio Description and press Q. Highlight Audio Description then press C or c to select On. Audio Description Audio Description Mixing Level Speaker Out 50 Off On NOTE: · The available item alters depending on the current input source. For example, while watching the DTV 2ch programme, only the DTV 2ch is available and other two items are greyed out in the menu. When you select Game mode, suitable widescreen formats will be selected. · PC mode is available in RGB/PC input mode or HDMI input mode. Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. a In the SETUP menu press b until Picture Position is highlighted. SETUP Country Ant/Cable In Auto Tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV Connection Picture Position Germany Antenna a In the PITCURE menu press b to select Picture Mode. PICTURE Picture Mode Reset Backlight Contrast Brightness Colour Tint Sharpness 60 95 0 0 0 0 AutoView b c Press Q to view the options available for the picture format that has been selected. Press B and b to select an option, then C or c to adjust the settings. The options alter depending on currently selected widescreen format and the input signal. In Cinema: Picture Position Horizontal Position Vertical Position 0 0 Reset b Press C or c to select the picture mode you prefer and press Q. NOTE: The picture mode you select affects the current input only. You can select a different picture mode for each input. Picture preferences You can customise current picture mode settings as desired. For example, while selecting "Dynamic, " if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new setting is saved as the same name "Dynamic. " To return to the original factory settings select Reset in the Picture Position menu and press Q. a b In the PICTURE menu press b to select either Backlight, Contrast, Brightness, Colour, Tint or Sharpness and press Q. Press C or c to adjust the settings. 23 CONTROLS AND FEATURES English Reset This feature resets all picture settings to the factory settings except Picture Mode. NOTE: If any picture settings have not been changed, Reset is not available. c Press C or c to select Hue, Saturation or Brightness, then press B or b to adjust the settings as required. Hue Red 0 Saturation 0 Brightness -1 a b In the PICTURE menu press b to select Reset and press Q. Press C or c to select Yes and press Q. d Press Q to return to the previous menu. To return to the factory settings select Reset and press Q. 3D Colour Management When 3D Colour Management is set to On it allows the `Base Colour Adjustment' feature to become available. Colour Temperature Colour Temperature increases the `warmth' or `coolness' of the picture by increasing the red or blue tint. a b In the PICTURE menu press b to select Advanced Picture Settings and press Q. [. . . ] This will explain the basic operation of text in some detail. If further information is needed on how to use text see the text section. 44 PROBLEM SOLVING English Q A LED-3 Orange (Solid) Red (Solid) Why are the LEDs on the front of the television flashing? Check the table below. LED indication LED-2 Green (Solid) Green (Solid) LED-1 Green (Solid) Green (Solid) Condition Power ON On Timer is set Program Timer is set Power ON On Timer is set Program Timer is working Power ON On Timer is set Program Timer is NOT set Power ON On Timer is NOT set Program Timer is set Power ON On Timer is NOT set Program Timer is working Power ON On Timer is NOT set Program Timer is NOT set Power OFF (Standby) On Timer is set Program Timer is set Power ON (Standby) On Timer is set Program Timer is working Power OFF (Standby) On Timer is set Program Timer is NOT set Power OFF (Standby) On Timer is NOT set Program Timer is set Power ON (Standby) On Timer is NOT set Program Timer is working Power OFF (Standby) On Timer is NOT set Program Timer is NOT set Power protect detection. Solution LED-3 LED-2 LED-1 ­ ­ OFF Green (Solid) Green (Solid) ­ Orange (Solid) Red (Solid) OFF Green (Solid) Green (Solid) ­ OFF ­ OFF OFF Green (Solid) ­ Orange (Solid) Red (Solid) Green (Solid) Green (Solid) Red (Solid) Red (Solid) ­ ­ OFF Green (Solid) Red (Solid) ­ Orange (Solid) Red (Solid) OFF Red (Solid) Red (Solid) ­ OFF ­ OFF OFF Red (Solid) ­ Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV. OFF OFF Red Blinks 45 INFORMATION English License Information THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/ OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. [. . . ]