User manual TOSHIBA AV-605

[. . . ] AV60*P* ANALOGUE Series English Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation and important information . . . . . . . 3 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Inserting batteries and effective range of the remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Programme: The number to be pressed on the remote control. Colour system: Factory set to Auto, should only be changed if problems are experienced, i. e. Programme skip: means nothing has been stored or the facility to skip the channel is ON. Channel: The channel number on which a station is being broadcast. Search: Search up and down for a signal. Manual fine tuning: Only used if interference/weak signal is experienced. Use the navigation ring or and or buttons to enter up to seven characters. Watch TV Use and to highlight the programme position required e. g. 0 for a media recorder. Manual tuning Prog. 0 1 2 3 4 5 OK Channel C3 C5 C6 C69 C69 C69 EXIT Station Sort Select RETURN Back Watch TV Different Channel numbers may be displayed. If the programme is skipped, Programme skip must be removed before storing. Manual tuning Programme skip: Off 0 D/K OK A S1 0 RETURN Store Back EXIT Watch TV 4 Press to select System and use or to change if required. Then press to select Search. 17 TUNING THE TELEVISION English Press or to begin the search. The search symbol will flash. Manual tuning Search:Up 0 D/K OK Programme skip To prevent certain programmes from being viewed, the programme position can be skipped. The remote control must be removed as the channels will still be available using the number buttons. Programmes can then be watched as normal using the controls on the television, but the television will not show the skipped programme position. Select Manual tuning from the SET UP menu. Manual tuning Prog. 0 1 2 3 4 5 OK A C8 0 RETURN Store Back EXIT Watch TV Each signal will show on the television, if it is not your media recorder, press or again to restart the search. When your media recorder signal is found, press to move along to Station. With , , and put in the required characters, e. g. VCR. Manual tuning Station 0 D/K OK Channel C3 C5 C6 C69 C69 C69 EXIT Station A C9 0 VC R Sort Select RETURN Back Watch TV RETURN Store Back EXIT Watch TV Press to store. Use or to highlight the programme position to be skipped and press to select. Press to select Programme skip. Repeat for each programme position you want to tune or, press RETURN to return to the list of channels and select the next number to tune. DVD on EXT1, press to select 1, then select Manual setting from the SET UP menu. Press or to select Label then using , , and put in the required characters. Manual setting Label EXT1 OK 4 Use or to turn Programme skip on. [. . . ] broadcasting channel and press Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. Why is the VCR/DVD picture in black and white? Check the correct input has been chosen, S-VIDEO or AV. See AV connections page 30. 34 IMFORMATION English Q A Why are the colours wrong when an NTSC source is played?Connect the source via a SCART lead and play. [. . . ]