User manual TOSHIBA B-852-TS12-QQ

[. . . ] TEC Label/Tag Printer B-852-TS12-QQ Owner's Manual This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ] (Used with PDF417 only. ) · Truncated. Used to specify that a trimmed-down version of a PDF417 bar code be printed in order to save space on the label. (Used with PDF417 only. ) · Row Height. Used to specify the height of each row in a PDF417 bar code. (Used with PDF417 only. ) · Columns. Used to specify the number of columns in the checkerboard data area of a PDF417 bar code. (Used with PDF417 only. ) · Start Character. Used to specify which one of the four letters, a - d, will be used as the start character with a Codabar bar code. (Used with Codabar only. ) · Stop Character. Used to specify which one of the four letters, a - d, will be used as the stop character with a Codabar bar code. (Used with Codabar only. ) · Guard Bar Height. Used to specify the length of the UPC guard bars. (Used with UPC-A, UPC-E, EAN-13, and EAN-8 only. ) · Supplemental. (Used with UPC-A, UPC-E, EAN-13, and EAN-8 only. ) NOTE: The Edit Bar Code Font property page will display different options depending on which bar code symbology is selected. For example, if the Symbology option is set to "Interleaved 2-of-5, " the only symbology-specific option that will be displayed is Check Digit. However, if the Symbology option is set to "Code 128, " the symbology-specific area will also display the UCC/EAN-128 and Code Set options. 3-23 3. PRINTER OPERATION EO1-33029 3. 4 Using the B-852 Printer Properties Menus 3. 4. 7 Bar Fonts Tab (Cont. ) NOTE: Pressing the Help button on the Bar Code Font property page will access additional information concerning each of the above bar font properties. · Symbol Type. Used to specify the type and level of error correction to use. (Used with Data Matrix only. ) · Character Set. Used to specify the allowable characters for data. (Used with Data Matrix only. ) · Use Prefix. (Used with Data Matrix only. ) · Shape. [. . . ] If the media distance covered is 69. 4 cm or less, it is rounded down and no data is added to the memory at power off. When the media distance covered reached to the maximum, the maintenance counter should be cleared. Otherwise, the total media distance covered will not be updated. For the maintenance counter clear, please contact your nearest TOSHIBA TEC service representative. · Descriptions of the Parameters No. [. . . ]