User manual TOSHIBA CF19F30

[. . . ] 6 2. 1 Enabling CF19F30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2 Installing the Infineon CF19F30 Professional Package . . . . . . . . . . . . . . . . . . . . . . . . 7 2. 3 Registering Owners and Users in CF19F30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Personal Secure Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the Emergency Recovery screen, select the Create a new Recovery Token and specify the location for creating and saving the Emergency Recovery Token. In the Emergency Recovery screen for Emergency Recovery Token authentication, enter the password in the Password and Confirm Password text boxes and click the Next button. It is strongly recommended that you create an emergency recovery token is created so that information in CF19F30 and user data related to CF19F30 is safe in the event that severe system troubles occur. Failure to follow this recommendation could possibly result in data loss. In the Password Reset screen, select the Create a new Token and specify the location for creating and saving the Password Reset Token. In the Password Reset screen for Password Reset Token authentication, enter the password in the Password and Confirm Password text boxes and click the Next button. It is strongly recommended that you create and save the Password Reset Token on a storage medium such as a floppy disk that is accessible even in the event of a computer failure. Be sure to store the disk in a safe location for possible future use. n If there are multiple computers with CF19F30, the token for each computer is different and should be stored separately. n The recovery token for the registered CF19F30 owner* cannot be recreated. In order to prevent loss, multiple copies of the token should be created and stored, as recommended in the note above. If any of the Outlook, Outlook Express or Netscape buttons are clicked on the screen, the help for the Secure E-mail settings for the respective Mail Software is displayed. (It is possible to see this help even after the wizard is closed. ) 19. The Encryption Certificate issuance message would be displayed in the Security Platform Features screen. Select the certificate to issue and click the Next button. Normally, click on the Create button to create and select the certificate. If Personal Secure Drive (PSD) is selected in the Security Platform Features screen, the following screen is displayed. On this screen, select the drive you wish to allocate to PSD, then enter the label name of that drive and click the Next button. Refer to Chapter 3 - Personal Secure Drive for details on Personal Secure Drive (PSD). In the Security Platform Features screen, enter the volume of storage space you wish to allocate for PSD, then select the drive and click the Next button. Installation Guide 9 CF19F30 (Trusted Platform Module) 22. The Confirm setting is displayed, click the Next button. n It is strongly recommended that you specify a built-in HDD (Hard Disk Drive) (normally C drive) in the My Personal Secure Drive will be saved on this drive pull-down menu. [. . . ] (The operation must be performed for both the source platform and the destination platform. ) Please perform the operation as per the instructions on the screen. Only the CF19F30 data is migrated during this process, so perform the migration of the data inside the Personal Security Drive and the files encrypted with EFS using the usual file operations. n Remember, it is necessary to also install the Infineon CF19F30 Professional Package in the destination platform. n Migration between the PCs via a network cannot be done when using Windows® Firewall under the Windows® XP-SP2 environment. [. . . ]