User manual TOSHIBA CF20D30

[. . . ] 7 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 The Time Display ­ analogue only . . . . . . . . . . . 21 Stereo and Bilingual transmissions . . . . . . . . . . . . [. . . ] Press B or b to highlight Wireless Setup, and press d e f Press B or b to highlight Network Name, and press Q. The Software Keyboard window will appear. Input the Network Name by using the Software Keyboard (see page 37). To save your setting, press the BLUE button. Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES. NOTE: · Certain encryption types are only compatible with specific authentication types. - When Authentication is Open System, only WEP or None is compatible. - When Authentication is Shared Key, only WEP is compatible. - When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible. · When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved. NOTE: Press the RED button to scan for all available APs. Item Description Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP. Connection signal strength with AP (STRONG/MEDIUM/WEAK) Link with AP Working mode (11a, 11b, 11g, 11n) Channel in use (1-165) Status IP Address Setup Auto Setup: Signal Speed Mode Channel Authentication Encryption Security Key AP MAC Address USB MAC Address DHCP a b In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Advanced Network Setup, and press Q. Network Setup Network Type Wireless Setup Advanced Network Setup Wired Network Name SSID set Authentication set Encryption set Security Key set The AP's MAC address is displayed when the TV is connected with the AP. The MAC address of the USB (Dual Band WLAN Adaptor) is displayed. Disabled is displayed when not using DHCP. The TV's IP address Value of the Subnet Mask Address of the Default GATEWAY Address of the DNS c Press B or b to highlight IP Address Setup, and press Q. Advanced Network Setup IP Address Setup DNS Setup MAC Address Wired IP Address Subnet Mask Default Gateway DNS 35 CONTROLS AND FEATURES English d Highlight Auto Setup, and then press C or c to select On. IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway 133 255 . 177 255 NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. On . 157 0 DNS Setup NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). [. . . ] Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. [. . . ]