User manual TOSHIBA CF32E55

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO to change to mono sound. Press it again to return to the stereo sound. STEREO CH 013 RECALL TV/DVD POWER INPUT SELECT 1 4 7 SLEEP 2 5 8 0 3 GAME 6 OPEN/CLOSE 9 CLOSED CAPTION MUTE TOP MENU SUBTITLE AUDIO ANGLE SETUP/MENU DVD MENU CANCEL ZOOM/CH RTN CH + VOL RETURN VOL + ENTER LISTENING TO SAP (SEPARATE AUDIO PROGRAM) When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the "Separate Audio Program" broadcasting is available. STEREO SAP CH 013 CH REV PLAY FWD PLAY MODE SKIP STOP SKIP JUMP SLOW PAUSE SLOW REPEAT AB TO SELECT DESIRED SOUND Press AUDIO to select the desired sound. SEL. STEREO MONO+SAP BROADCASTING MONO SOUND (MAIN) SAP SOUND MONO + SAP SOUND (MONO) STEREO+SAP BROADCASTING STEREO SOUND (MAIN) SAP SOUND MONO SOUND (MAIN) MONO + SAP SOUND (MAIN) 24 Disc About this owner's manual This owner's manual explains the basic instructions of this TV/DVD. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the TV/DVD may not respond to all operating commands. " " may appear on the TV screen during operation. A " " means that the operation is not permitted by the TV/DVD or the disc at the moment. For example, it is unable to skip the playback of copyright message of the disc when the SKIP(7) 7 button is pressed. Alternatively, the " " may also indicate that the feature is not available for the disc. Playable discs This TV/DVD can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx. 4 hours (single sided disc) 12 cm Audio + video (moving pictures) 8 cm Approx. The disc tray will open. INPUT SELECT 1 4 7 SLEEP 2 5 8 0 3 GAME 6 OPEN/CLOSE 9 CLOSED CAPTION MUTE TOP MENU SUBTITLE AUDIO ANGLE 2 Place a disc onto the tray. Position it with the printed label side up, align it with the guides, and place it in its proper position. SETUP/MENU DVD MENU CANCEL ZOOM/CH RTN CH + VOL RETURN VOL + ENTER CH Press 3 PLAY. OPEN/CLOSE or The disc tray closes automatically. The TV-screen, changes to " " and then playback commences. A menu screen will appear on the TV screen, if the disc has a menu feature. REV PLAY FWD PLAY MODE SKIP STOP SKIP JUMP SLOW PAUSE SLOW REPEAT AB NOTES: If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 25 and 36). Some discs may take a minute or so to start playback. When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE on the unit, " " will appear on the display for 3 about seconds and then "No Disc" will be displayed. Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. [. . . ] You pay for all transportation and insurance charges for the set to and from the Service Station. Limited One (1) Year Warranty TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of one year after the date of original retail purchase. During this period TACP/THI will replace a defective part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP/THI Authorized Service Station. You are responsible for all transportation for the set to and from the Service Station. Limited Two (2) Year Warranty of Picture Tube TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. [. . . ]