User manual TOSHIBA EQUIUM M100

[. . . ] To go to the Exit menu from any other menu, press the [Esc] key. POINT Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. s Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. POINT Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following: 1. [. . . ] Multi-word DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA. Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. Disabled Enabled PIO Transfer Mode: s s s s s Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Disabled Multiword DMA 1 Multiword DMA 2 Ultra DMA 0 Ultra DMA 1 Ultra DMA 2 [Standard] DMA Transfer Mode: s s [Disabled] s s s s Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 8 Advanced Menu ADVANCED MENU ­ SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: s Enable or disable support for Plug & Play operating systems. When selected, opens additional menus to configure PCI devices. When selected, opens the USB Features submenu, which allows enabling or disabling of Legacy Floppy Emulation. When selected, opens the event logging submenu. Yes No Keyboard/Mouse Features ­-- ­-- Video Features ­-- ­-- Internal Device Configurations ­-- ­-- PCI Configurations USB Features ­-- ­-- ­-- ­-- Event Logging ­-- ­-- 10 Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Keyboard/Mouse Features Numlock: [Auto] Internal Pointing Device: [Manual Setting] Select power-on state for Numlock. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 5 Keyboard/Mouse Features Submenu Table 5: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Numlock: Options s s s Default [Auto] Description Sets the NumLock function state when the computer completes booting. Auto On Off Manual Setting Always Enabled Always Disabled Internal Pointing Device: s s s [Manual Setting] Sets the device controlling the mouse cursor on the screen. Manual Setting allows the device to be enabled or disabled by a Hot Key. Always Enabled makes the pointing device always enabled whether there is an external mouse or not. Set is displayed when the general user password is set, and Clear when it is not. Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. The User Password may be up to seven characters long and must include only letters or numbers (no symbols). To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. ­-- Clear Set Supervisor Password ­-- [Enter] Set User Password ­-- [Enter] Minimum User Password Length: ­-- [0] 20 Security Menu Table 12: Fields, Options and Defaults for the Security Menu Menu Field Password on Boot: Options s s s Default [Disabled] Description When set to DIsabled, no password is required. When set to First Boot, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system is read from a disk. [. . . ] <+>/<Space> or <-> moves the device up or down. <Shift+1> enables or disables a device. © F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 18 Boot Device Priority Submenu Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field Floppy Disk Drive Options ­-- Default ­-- Description The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that source. [. . . ]