User manual TOSHIBA FT2000

[. . . ] · Take the cover off the handset battery compartment; plug the battery connector into the receptacle inside the battery compartment and replace the cover. · Place the handset into the base unit's charging cradle. · The battery charging period has now started. From now until the 12~16 hours period is complete, do not let anything cause the handset to be removed from electrical contact with the base unit's charging pins or power to be removed from the base unit. [. . . ] 5 Press five times then press to move the cursor to MEM SELECT 8 3 the right. 6 Press 7 Press 8 Press 9 Press 22 3 3 6 3 four times then press once. five times. twice to enter a space. MEMORY DIALING 10 When finished, press 11 Press stored. 12 Press . 1 1 2 SELECT 3 4 . 5 6 7 8 9 0 to be SELECT IF YOU MAKE A MISTAKE WHILE ENTERING A NAME or to move the cursor to the incorrect character. Press to erase the wrong entry, then enter the correct character. To delete all characters, press and hold DELETE . DELETE Use Basics Basics DIALING A STORED NUMBER 1 Pick up the handset and press . 2 Press , or enter a number (0-9) to MEM s 1sTed Doe 2 DOE JOHN 3 MOM AND DAD display the desired destination. NOTE: When you press SELECT , the LCD displays both the name and the telephone number. When the stored phone number has 15 or more Ted Doe digits, is displayed next to the 13th digit. Press s 1s1234567890 to see the rest of the numbers, and to return. 3 Press TALK . The selected number will be dialed. NOTE: If you press MEM while you are selecting a location, memory selection is cancelled and the handset returns to standby. 23 MEMORY DIALING EDITING AND DELETING STORED NUMBERS You can delete a number or simply store another one in its place. When you store a new phone number, the data stored in that memory location is deleted automatically. 1 Pick up the handset and press and hold The confirmation tone sounds. MEM . 2 Enter a number (0-9) or press 3 Press Basics SELECT Memory Store s 1sTed Doe 2 DOE JOHN , to select the memory location you want to edit/delete. . sEdit Memory 1 Delete Memory 1 Go Back 4 Press or to select the desired function . CIDCW (Caller ID on Call Waiting) performs the same as regular Caller ID on a call waiting number. You must subscribe to the "Caller ID on call waiting (CID CW) services" before you can use the following features. The "Call waiting" service can also be used independently. Please contact your local telephone company for details. VOL/RING VOL/RING ( ) ( ) FLASH SELECT CID LOCAL/3 DELETE TALK L. D. /1 Caller ID/Call waiting 27 CALLER ID/CALL WAITING SEARCHING CALLER ID MEMORY To review who has called, follow the steps below. The caller ID memory retains a listing of the 20 most recent callers. 1 Pick up the handset and press If there is new caller ID data: CID . If new caller ID data does not exist: Total:02 New :01 Total:02 2 Press Press to display the latest incoming call. to see the previous incoming call. CID 1/7 9:30AM 12 DOE JOHN 555-2563 3 Press Caller ID/Call waiting to return to standby mode. CALLING BACK FROM THE CALLER ID LIST 1 Pick up the handset and press press or wish to call. CID . Then, to display the number you 1/7 9:30AM 12 SMITH JOHN 456-7890 2 Press TALK . The displayed number will be dialed. TALK 4567890 NOTE: To enter a number for a long distance call, see "EDITING CALLER ID DATA" on page 29. It is not necessary to add a "1" when dialing some area codes. If in doubt, check your local telephone directory. 28 CALLER ID/CALL WAITING EDITING CALLER ID DATA You can edit the Caller ID data. 1 Pick up the handset and press 2 Press CID . Then, press or repeatedly to display the Caller ID data you want to edit. [. . . ] (2) These warranties are effective only if the product is purchased and operated within the USA or Puerto Rico. (3) Within the continental U. S. A. , if you should find a defective product within the warranty period, please call 1-877-644-7373. (4) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or parts which have been lost or discarded by you, or to damage to products or parts caused by misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use in violation of instructions furnished by us; or to units which have been altered or modified without authorization of TACP/THI, or to damage to products or parts thereof which have had the serial number removed, altered, defaced or rendered illegible. (5) Physically damaged products are not acceptable for repair or exchange within or after the warranty period expires. How to Obtain Warranty Service In the event a problem should develop with your product, please proceed as follows; In The Continental United States contact: www. toshiba. com/tacp In Hawaii contact: Toshiba Hawaii, Inc. 327 Kamakee Street, Honolulu, HI 96814 (808)-591-9281 All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. [. . . ]