User manual TOSHIBA FT5005BK

[. . . ] · Plug the AC adaptor cord into the power jack on the base unit. · Take the cover off the handset battery compartment; plug the battery connector into the receptacle inside the battery compartment and replace the cover. · Place the handset into the base unit's charging cradle. · The battery charging period has now started. [. . . ] Then, press or to indicate the number you want to store in the memory. 2 Press . 3 Enter a two-digit number (01-20) or press to select memory location. 30 , Select Location s 01s 02 CALLER ID/CALL WAITING 4 Press Press SELECT . A confirmation tone sounds and the Caller ID data is stored. Press CID to return to standby. If you select a memory location which is already stored: to select " " and press SELECT . Replace Memory? Yes sNo A confirmation tone sounds and the new data overwrites the old data. The LCD returns to the Caller ID display screen. If you select : The LCD returns to the Caller ID display screen. Press CID to return to standby mode. DELETING CALLER ID DATA Caller ID/Call waiting DELETE INDIVIDUAL CALLER ID DATA: 1 Pick up the handset and press 2 Press Press DELETE CID . Then, press or to display the caller ID number you want to delete from the memory. . to select Yes or No. or 3 Press Delete Message?If you select " , you hear a confirmation tone and the LCD displays " the next caller ID data. If there is none, the LCD displays the number of calls. If you select " screen. ", the LCD returns to the Call ID display 4 Press CID to return to standby. 31 CALLER ID/CALL WAITING DELETE ALL CALLER ID DATA: 1 Press 2 Press Press CID . New :01 Total:02 DELETE . Starts a 3-way conference call with both callers. Disconnects 2nd caller. 3 4 5 6 Answer / Drop 1 Conference Drop First Drop Last NOTES: · When using any of the options listed above, an extra charge might apply. · Not all options are available in all areas. Check with your local telephone company for details. Caller ID/Call waiting 35 USING THE MENU MODE Menu mode allows you to set the following Answering System functions. The following MENU MODE instructions assume that every setting starts from standby mode. ANSWER DELETE REPEAT REW REC/MEMO LED display / SELECT FF SKIP STOP SET MENU / SELECT 1 2 3 MAILBOX VOL/+ VOL/­ Menu No. Function Menu1 Menu2 Menu3 Menu4 Greeting message Clock Security code (PIN) Ringer volume Ring time Recording time Return to standby LED display -- -[ ]-[ [ [ ]-[ ], [ ], [ ], [ ], [-- --] ] ], [ ] ] ], [ ] Answering System Menu5 Menu6 Standby [ ], [ ], [ ], [ [ ], [ ], [ ] [ ]-[ ], [ NOTES: · If you make no entries within 20 seconds, or 20 seconds pass after a voice prompt/guidance or greeting, you will hear a long beep and the answering machine returns to standby. Note that time-out for clock setting is 2 minutes. · Receiving a call or pressing talk will cancel the setting. If you press STOP , the setting is canceled and returns to standby. · You can scroll to the next menu option by pressing MENU . · You can use VOL/+ or VOL/­ to adjust the announcement volume level during voice prompt/guidance. 36 USING THE MENU MODE RECORDING THE GREETING MESSAGE You can record a personalized greeting message (up to 30 seconds) or use the pre-recorded message. [. . . ] In no event shall TACP/THI be liable for consequential or incidental damages. Additional Information No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the warranty or under any statute or law of the United States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have dicovered, the defect. This limitation does not apply to implied warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. [. . . ]