User manual TOSHIBA FT6200

[. . . ] Do not place this product on an unstable surface, such as a table, shelf or stand. The product may fall, causing serious damage. Slots and openings in the back or bottom of the base unit and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. [. . . ] Locate the record you want to delete from call history. With the handset in idle (OFF) mode, press and hold DELETE. Locate the record in call history that you want to dial. If you wish to change how the number is dialed, press #. The screen displays alternate dialing sequences available for this call (area code + number; (1 + area code + number; number only; 1+ number). Press until DIAL flashes. 17 91-000132-020-000. t2429 English manual (R1). pmd 17 12/29/2004, 5:27 PM BASIC OPERATION Caller ID Operation DIAL PROGRAM 8005959511 5/01 5:40 PM OLD28 4. The number is automatically dialed. -ORWhen the number is correctly displayed for dialing, press PHONE. Store a Call History Record in the Directory 1. Locate the record in the call history you want to store in the directory. lf you wish to change how the number is stored, press#. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). If the phone doesnít work at all, check these items first: · Make sure the AC adapter is plugged into an outlet not controlled by a wall switch. · Make sure the telephone line cord is plugged firmly into the base unit and the modular jack. · If the handset does not beep when you press PHONE, the battery might need charging. · Make sure the battery is installed correctly. · If you have dial pulse (rotary) service on your phone line, make sure the dial mode is set to dial pulse (see INSTALLATION). · Microwave appliances may cause interference with this phone. If you experience interference, move away from the microwave If the above suggestions donít solve the problem, try reinitializing the handset and base: 1 Disconnect the power to the base. 6 Put the handset in the base to reinitialize. If the phone does not ring when you receive a call: · Make sure the handset ringer is on. · Make sure the telephone line cord is connected firmly to the base and the telephone jack. · Make sure the AC adapter is plugged firmly into an outlet not controlled by a wall switch. [. . . ] 13 Telephone Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Store a Number/Name in the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Edit a Number/Name Stored in the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Delete a Number/Name Stored in the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]