User manual TOSHIBA FT6210

[. . . ] For assistance, visit our website: http://www. panasonic. com for customers in the U. S. A. or Puerto Rico. TG2480(e). book Page 2 Monday, August 7, 2006 10:32 AM Table of Contents Introduction Accessory information . 19 Viewing the caller list and calling back . 30 Editing a caller's phone number before calling back . [. . . ] L If the line selection is "Auto" (page 40) and you press {C} or {s}, the indicated line will be selected. If the indicated line is already being used or you want to select the other line, press {MENU}, {Call}, and select the other line by pressing {Line1} or {Line2}. Caller ID number auto edit feature Once you call back an edited number (see "Editing a caller's phone number before calling back"), the unit can automatically edit other incoming phone numbers each time you receive a call. For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can For assistance, please visit http://www. panasonic. com/consumersupport 31 TG2480(e). book Page 32 Monday, August 7, 2006 10:32 AM Caller ID Service Storing caller information into the phonebook Items in the caller list can be stored into the phonebook. Erasing all items Make sure that you have no missed calls. 1 2 3 Press {V} or {^}. Press {V} or {^} repeatedly to display the desired item. L To edit the number, press {Edit} repeatedly until the number is shown in the desired format (see page 31, step 4). L If there is no name information for the caller, "Enter name" will be displayed. 1 Enter the name if necessary (see page 26, step 4). L To continue storing other items, repeat from step 3. Press {OFF}. 1 2 3 4 Press {V} or {^}. Press {Yes}. 4 5 Note: L If the caller information does not include a phone number, you cannot store it in the phonebook. Erasing caller information Erasing a selected item 1 2 3 4 Press {V} or {^}. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually. 1 2 3 4 5 6 7 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Voice Mail" by pressing {V} or {^}, then press {Select}. Scroll to "VM tone detect" by pressing {V} or {^}, then press {Select}. Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. Message alert You can select whether or not the message indicator on the handset will flash when new messages have been recorded. The default setting is OFF. Listening to Voice Mail messages The unit will let you know that you have new Voice Mail messages in the following ways: ­ The V. M. ­ "Voice Mail" will be displayed on the handset. ­ The message indicator on the handset will flash slowly if message alert feature is turned on. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Message alert" by pressing {V} or {^}, then press {Select}. [. . . ] This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262). [. . . ]