User manual TOSHIBA FT7116BK

[. . . ] KX-TCA94EX General information R This phone is designed to operate on GSM network - Dual band GSM 900/1800 MHz. If you are inside a tunnel, basement, or buildings where does not provide satisfactory reception, move to another location for better reception. R This equipment is designed for use in Spain and Portugal. R In the event of problems, you should contact your equipment supplier in the first instance. [. . . ] Contact your network operator/service provider for details. R If your SMS message contains over 160 characters (70 characters depending on character type), it is a long message. The message length indicator in the upper-right of the screen displays the number of characters remaining and the number of SMS messages required to send. Your network operator/service provider may treat long messages differently from other SMS messages. Contact your network operator/ service provider for details. R You cannot send or receive SMS messages containing pictures, sound, or contacts list. 1 2 3 M N ® MbN: "Inbox" ® MbN: Select a message. R To scroll through the SMS messages, press and hold MCN or MDN. Press to read the message content. Note: R Display the inbox by simply pressing when "New Message(s)" is displayed. Replying to a received message 1 2 3 4 5 While reading a received message, press . MbN: "Reply Message" ® Enter a message (page 19). ® R To save the message: ® MbN: "Save" ® Edit the destination phone number if necessary. ® To send the message, select "Yes". ® R To change the input letter case for searching the contacts list, press M N (page 19). 1 2 3 4 ® ® MbN: "Create" ® MbN: "(No name)" ® Enter the party's name (16 characters max. ; page 19). ® R To change the input letter case, press M N (page 19). R To change the input mode: ® MbN: "Input mode" ® ® MbN: Select the desired input mode (page 19). ® MbN: "1) No number" ® Enter the party's phone number (40 digits max. ). ® R If you want to store another phone number, select "2) No number" when it is displayed. R When the selected memory location is SIM card, go to step 9. MbN: "(Ungrouped)" ® MbN: Select the desired group. ® 2 5 6 MbN: Select the desired contact. R Press a dial key (M0N to M9N) repeatedly to display each first contact corresponding to each character located on the selected dial key (page 19). If there is no contact corresponding to the character you selected, the next contact is displayed. M N R If 2 phone numbers are stored for the contact, both phone numbers are displayed. [. . . ] Erase unnecessary text messages (SMS) to receive new voicemail message notifications (page 20). R Some kind of text messages (SMS) can be received to the SIM card only. Check the memory status in the SIM card (page 21) and erase unnecessary text messages (SMS) (page 20). R This phone only supports text message (SMS) services. [. . . ]