User manual TOSHIBA FT8006BK

[. . . ] Store caller ID in your directory Dial from caller ID . 7 8 8 8 9 20 20 20 22 22 23 24 24 25 26 26 27 27 29 29 29 30 30 30 30 3 3 3 www. vtechphones. com Table of contents Answering system operation . Turn the answering feature on and off . Turn announcement only mode on or off . [. . . ] Press STOP when you are done. " Start recording your memo . When the system announces, "Answering machine off, " press 0 again to turn the system back on . When the system is off, it answers after 0 rings and announces, "Please enter your remote access code. " Enter your remote access code . Record announcement Record memo 8 Review remote access code Change remote access code Turn system off Turn system on #9 *7 0 0 The message alert function produces an audio tone to remind you that there are new messages on the answering system . Press SETUP three times and you will hear "Message alert. To change the setting, press CHANGE. " 2 . Press CHANGE to confirm the current status; on or off is also displayed on the message window . Press CHANGE again to change the setting . Press SETUP to save and advance to the next menu option or press PLAY/STOP / to save and exit . Message alert 40 www. vtechphones. com Answering system operation When the message alert function is turned on, the telephone base beeps every 0 seconds, and PLAY/STOP / and the number of messages in the oval message window flash when there are new messages . If PLAY/STOP / and the number in the message window are on steadily, there are no new messages . Announcement only mode In announcement only mode, callers hear an announcement but cannot leave messages . When announcement only is turned on, calls are answered with the pre-recorded announcement "We're sorry. Messages to this number cannot be accepted" or you may record your own message . Press CHANGE to set the number of rings to 2, 4, 6, or toll saver . Press SETUP to save and advance to the next setup option, or press PLAY/STOP / to save and exit . Number of rings 42 www. vtechphones. com Answering system operation Message window displays Display 0 - 98 -8 0 - 99 - 99 (counting) 99 (flashing) F (flashing) CL (flashing) A --- (flashing) On or OFF 02, 04, 06, tS Explanation No messages . Total number of messages and memos, or message number currently playing . Number flashes if there are new messages. Playback or ringer volume level selected when VOL Current remote access code while setting Elapsed time while recording a memo or announcement up to 90 seconds . Memo or announcement recording exceeds maximum time of 99 seconds . Messages must be deleted before new messages can be recorded . Answering system is answering a call or being accessed from a remote location or the base speaker is being used . Displayed for one second when any answering system setting is turned on or off . Change number of rings until the system answers the call . or is pressed . Basic operation www. vtechphones. com 43 Headset operation · To purchase a headset, visit us on the web at www . [. . . ] For repair procedures, follow the instructions outlined under the Limited Warranty . If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service . The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. [. . . ]