User manual TOSHIBA FT8901A

[. . . ] Preparation Preparation Basics Basics Answering system Answering system Additional Information Additional Information GETTING STARTED: DO THIS FIRST! FIRST, After unpacking your new cordless phone: Preparation CHARGE THE HANDSET BATTERY!· Set your new phone in an out-of-the-way place near a power outlet but where it will not be disturbed. · Plug the AC adaptor into the wall power outlet. · Plug the AC adaptor cord into the power jack on the base unit. [. . . ] Press PLAY/STOP . Finish the playback of all messages. Then, press and hold DELETE till a beep sounds. Press VOLUME/+ or repeatedly. VOLUME/­ To adjust the speaker volume (0-9) 26 USING THE ANSWERING MACHINE DELETING RECORDED MESSAGES To delete all messages: Press and hold DELETE till a beep sounds after playback of all messages. If there are messages that you have not listened to, an error tone sounds and the messages will not be deleted. To delete individual messages: While playing back the message you want to delete, press DELETE . The message is deleted and the next message will be played. NOTE: To maintain maximum record time, it is a good idea to delete the old messages. SCREENING INCOMING CALLS You can screen calls when the answering machine is on. 1 After the answering machine answers, the base speaker lets you hear the caller as the machine records the message. Answering system 2 To answer the call immediately, simply pick up the handset or press TALK if the handset is away from the base. The answering machine will disconnect automatically. NOTE: If the speaker volume is set to 0, you can not use the call screening feature. 27 USING THE ANSWERING MACHINE LEAVING A MEMO MESSAGE You can use the base unit to record a memo (up to 10 minutes), as a reminder to yourself or as a message for someone else in the household. A memo is stored and played back like any other incoming message, and the LED display will blink to indicate that a message has been received. 1 Press and hold REC MEMO/2WAY till a beep sounds. You hear "Record your message after the tone" and a long beep. 2 Begin speaking close to the microphone. 3 When you finish recording, press REC MEMO/2WAY or PLAY/STOP . RECORDING A PHONE CONVERSATION (2 WAY REC) You can record a telephone conversation that is already in progress with the handset (up to 10 minutes). The conversation is stored and played back like an incoming message. Answering system 1 During a call with the handset, press and hold 2 To stop recording, press You hear a long beep. REC MEMO/2WAY REC MEMO/2WAY till a beep sounds. Recording starts and both parties hear the intermittent beeps. or PLAY/STOP . NOTE: When recording a conversation, all handset keys, except FLASH , are disabled. Stop recording if you need to use any other handset keys. 28 USING THE ANSWERING MACHINE CALLING IN FROM A REMOTE LOCATION You can retrieve messages or change answering machine settings by calling your phone from a touch-tone phone. Even if the answering machine has been left off, you can still access it by turning it on first. 1 IF THE ANSWERING MACHINE IS OFF: Let the phone ring at least 10 times. The line will connect and you will hear several short beeps. Press # and enter your security code (PIN). IF THE ANSWERING MACHINE IS ON: After playing greeting message, press # and enter your security code (PIN). 2 The answering machine announces the number of new and old 3 Press messages. The unit automatically starts playing the Help guidance. # and the appropriate number button that corresponds to the operation you want (see TABLE OF COMMANDS on next page). 4 When you have finished, press system. Answering system # and 5 or hang up to exit the NOTES: · When entering your security code (PIN), the second digit must be entered within 2 seconds after the first one. · If you enter a wrong security code (PIN) 3 times, the line will be disconnected. · Enter the command within 15 seconds while you hear intermittent beeps. · When you call your phone while the message storage area is full, you will hear several short beeps after the 10th ring. [. . . ] The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have dicovered, the defect. This limitation does not apply to implied warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you. Additional Information 35 REMOTE OPERATION CARDS CUT REMOTE OPERATION OF FT-8901A A Call your machine from touch tone phone. [. . . ]