User manual TOSHIBA IK-TF2

[. . . ] INSTRUCTION MANUAL 3 CCD CAMERA IK-TF2 For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Retain this information for future reference. Model No. : IK-TF2 Serial No. : WARNING This is a Class A of EN55022 product. [. . . ] Used as the connector terminal for RGB output, and SYNC output. When the random trigger operation is used, the trigger signal is input and the index signal is output. This terminal also includes an RS232C format control. -8- 5'CONNECTION ' 5'1 Standard Connection ' Lens IK-TF2 Camera cable (option) RGB Less than 4mm DC IN 12V monitor DC power supply 5'2 Cautions on Connection ' * When connecting the camera cables, be sure to turn off the camera and the other equipment connected. * We suggest using a C mount lens made for a 3CCD camera. When using another lens, the best camera performance of this camera may not be obtained. (For example, low resolution may occur, focus may be lost through the range of a zoom lens, and flare, ghost or shading may occur) Furthermore, in order to avoid damaging the mounting portion of the camera head, use a lens which has projection dimension from the mounting base of less than 0. 157"(4mm). * For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounding type AC adaptor with the specifications described below. Power supply voltage Current rating Ripple voltage Connector * DC12V 10% * More than 830mA, Less than2. 5A * Less than 50mV*p*p* * HR10A*7P*4S by HIROSE electronics Co. Ltd Pins 1, 2 * 12V Pins 3, 4 * GND 5'3 Connector Pin Assignments ' DC IN 12V 1 2 3 4 +12V +12V GND GND RGB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R G B TXD GND GND GND SYNC 12V GND RXD TRIG HD IN/OUT VD IN/OUT INDEX -9- 6'OPERATION ' Referring to the item " 5. CONNECTION", connect each equipment correctly. Turn on the connected equipment and the camera. Pointing the lens at the object, operate the lens iris adjustment, focus adjustment, etc. . Referring to the item "6. 1 White Balance", operate the adjustment. Referring to the items "6. 2 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY", select the necessary items. 6'1 White Balance ' For the white balance adjustment for this unit, AWB (Automatic White Balance) and MANUAL (Manual white balance) adjustments are provided. Referring to the items "7. 2 (3) WHT BAL (White balance), 7. MODE SETTING BY ON SCREEN DISPLAY", select the desired mode. AWB *Automatic White Balance* * Adjust white balance by displaying the white object inside the area set by AWB menu and pressing the [DATA UP] button. When the shutter mode is EXT TRIG, AWB is not available. MANUAL *Manual White Balance* * Adjust the white balance manually using the WHT BAL menu while shooting the white object. Adjustment is performed by confirming with a waveform monitor. Outline Notes AWB(Automatic white balance) * Set the MODE to AWB on the WHT BAL menu. Perform the C. TEMP (color temperature conversion) setting, if necessary. [. . . ] The user is responsible for all transportation and insurance charges for the product to the Service Center. ISD reserves the right to substitute Factory Refurbished Parts and / or Factory Refurbished Product in place of those in need of repair. Step-by-step Procedures - How to Obtain Warranty Service [1] Verify operation of the unit by checking the instruction manual [2] If there is a defect in material or workmanship, contact an Authorized Service Provider within 30 days after the product fails to comply with specifications. [3] Arrange for delivery of the product to the ISD authorized service center. [. . . ]