User manual TOSHIBA IK-HR1CD

[. . . ] CAMERA CONTROL UNIT INSTRUCTION MANUAL IK-HR1CD For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future reference. Model # IK-HR1CD Serial # FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] These are chosen depending on shooting conditions. By pressing [DATA UP], [DATA DOWN] buttons while [DISP] button is pressed and the index menu is displayed, the camera operation is changed immediately from the currently selected scene file to the next. By pressing [DATA UP], [DATA DOWN] buttons while the Index menu is displayed, the camera operation is changed immediately from the currently selected scene file to the next. DATA UP FILE A FILE B FILE C DATA DOWN F I LE D F I LE E Note: Scene file does not contain the data of set "OPTION. " (Refer to the item "7. 3 Menus" (6) "OPTION" for the "OPTION" setting. ) 13 7 3 Menus Select the menu to change the setting by referring to the item "7. 1 Using the Menus". When the [MENU UP], [MENU DOWN] buttons are pressed, the " Move the " " to the item whose setting you wish to change. " on the screen moves up and down. 1 SHUTTER Electronic shutter The electronic shutter has three modes; AUTO, MANUAL, SS(Synchro Scan). Press the "Page" button to enter the Shutter Page. Use the "Data Up/Down" buttons to select the Shutter Mode. DATA UP A UTO AUTO MANUAL MA NUA L DATA DOWN SS The exposure time is controlled automatically to obtain the video level set. It is possible to select the exposure time from eight speed settings; OFF (1/60s: when set to 59. 94Hz, 1/50s: when set to 50Hz), 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/4000s. SS Shutter speed can be set by the horizontal scanning time (1H) unit. Note: When setting a rapid shutter speed, sensitivity degrades according to the speed. When a discharging light such as fluorescent lamp, etc. is used for the illumination, the flicker may be large. When an object is moving rapidly, the monitor may display the image distorted and/or blurred. Also, when a discharging light such as fluorescent lamp, etc. is used for the illumination, light and dark banding patterns may be displayed on the screen. Depending on the timing of flash and/or strobe firing, the contrast may be displayed on the screen. These are not malfunctions, just certain characters of the rolling shutter system. When the shutter speed setting is high, the hue may change depending on shooting conditions or objects. 14 11 Changing the setting in AUTO mode Move up and down by pressing MENU UP, DOWN Select the desired value by pressing DATA UP, DOWN Shutter mode -1 SHUTTER -(FILE A) AUTO, MANUAL, SS -100 to 100 00 10 to 10 00 Video level adjustment MODE LEVEL PEAK AVE SPEED AREA AUTO 0 05 05 10 PRESET A Peak and average ratio adjustment Automatic shutter response speed adjustment 1 to 20 Automatic shutter area selection PRESET A, PRESET B, PRESET C, PRESET D, PRESET E < MODE = AUTO> (a) Changing the video level in the automatic shutter mode Move the " " to LEVEL by pressing [MENU UP], [MENU DOWN] buttons. Select the video level by pressing [DATA UP], [DATA DOWN] buttons. The value increases by pressing [DATA UP] -1 0 0 0 100 The value increases by pressing [DATA DOWN] (b) Changing the automatic shutter detection (ratio between peak and average value) Move the " " to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons. Select the ratio between peak and average value by presshing [DATA UP], [DATA DOWN] buttons. (Peak:Average) The peak value increases by pressing [DATA UP] 0 0 :1 0 05:05 10:00 The peak value decreases by pressing [DATA DOWN] (c) Changing the automatic shutter response speed Move the " " to SPEED by pressing [MENU UP], [MENU DOWN] buttons. Select the response speed by presshing [DATA UP], [DATA DOWN] buttons. The response speed becomes faster by pressing [DATA UP] 1 10 20 The response speed becomes slower by pressing [DATA DOWN] 15 (d) Changing the automatic shutter zone area Move the " " to AREA by pressing [MENU UP], [MENU DOWN] buttons. [. . . ] You must notify an ASP within thirty (30) days after You discover that the Product does not perform in accordance with specifications during the Limited Warranty period. All warranty servicing of this product must be made by an ISD Authorized Service Provider. You must pack the Product in its original carton using the original packing material, then insert the original carton containing the Product into another carton with additional packing material before shipping the Product to an ASP. DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. [. . . ]