User manual TOSHIBA IK-TF9C

[. . . ] INSTRUCTION MANUAL 3 CCD CAMERA IK-TF9C For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future reference. Model #: Serial #: IK-TF9C FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] If the message appears with the C. TEMP set to 3200K, change the illumination or use a color temperature conversion filter. Automatic white balance adjustment cannot be performed because the color temperature is too high. If the C. TEMP is set to 3200K, set to 5600K. If the message appears with the C. TEMP set to 5600K, change the illumination or use the color temperature conversion filter. AWB NG C. TEMP HIGH 8 Result displayed AWB NG NOT AVAILABLE AWB NG Meaning Automatic white balance adjustment cannot be performed because the shutter speed mode is E. TRG mode. Automatic white balance adjustment cannot be performed for other reasons. Such as no white area is included in an object, etc. 2 MANU (Manual white balance) · Set the MODE to MANU on the WHT BAL menu. (Refer to the item "7. 2 (3) WHT BAL (white balance)". ) · Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc. (Refer to the item "7. 2 (3) (3. 2) Changing each setting in MANU (Manual) mode". ) 9 6. ITEMS CONTROLLED BY USING ON SCREEN DISPLAY Item MODE E. TRG MANU speed Available selections MANU, SS, E. TRG 1P SNR, 1P SR, PW SNR, PW SR OFF, 1/100s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/4000s, 1/10000s, 1/25000s, 1/50000s, 1/1000000s 2H/1592H~1590H/1592H, OFF, 2FRM~512FRM 2H/1060H~1058H/1060H, OFF, 2FRM~512FRM 2H/774H~772H/774H, OFF, 2FRM~512FRM OFF, 30fps, 40 fps, E. 30fps, E. 40fps , , 0. 01ms~50ms MANU, OFF 0dB~18dB AWB, MANU 3200K, 5600K -100~0~100 -100~0~100 ON, OFF -64~0~64 -64~0~64 -64~0~64 MANU, OFF -128~0~127 9600 bps, 19200 bps 50 ms OFF 0dB AWB 3200K 0 0 OFF 0 0 0 MANU 0 9600 bps Preset value (Factory setting) MANU 1P SNR OFF OFF 10 Electronic shutter Gain White balance Syncro. Partial read 30fps Partial read 40fps Partial read Trigger (1P SNR/SR) Trigger (PW SNR/SR) 1P exposure time MODE MANU MODE Color temperature MANUAL R GAIN MANUAL B GAIN GAMMA Master pedestal R pedestal B pedestal Shading correction mode Manual shading correction Baud rate OFF Process Option 7. MODE SETTING BY ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized even if the power source is turned off, so it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7. 1 Using the Menus When the power is turned on, the normal screen showing only the video signal appears. Change the output to each screen (video signal output, Index menu, and menus) by using the [DISP], [PAGE], [MENU UP], and [MENU DOWN] buttons. * A menu is selected when pushing the [PAGE] button after moving the "" on the screen by the [MENU UP], [MENU DOWN] button while the Index menu is displayed. POWER ON Video signal output DISP PAGE Index menu DISP DISP PAGE Menus PAGE SHUTTER MANU SS E. TRG PW SR PAGE GAIN MANU OFF PAGE WHT BAL AWB MANU PROCESS OPTION SHAD. 2 Menus · Select the menu to change the setting by referring the item "7. 1 Using the Menus". ) · When the [MENU UP], [MENU DOWN] buttons are pushed, the "" on the screen moves up and down. Move the "" to the item to change. [. . . ] The user must deliver the entire product to an ISD authorized service center. The user is responsible for all transportation and insurance charges for the product to the Service Center. ISD reserves the right to substitute Factory Refurbished Parts and / or Factory Refurbished Product in place of those in need of repair. Step-by-step Procedures - How to Obtain Warranty Service [1] Verify operation of the unit by checking the instruction manual [2] If there is a defect in material or workmanship, contact an Authorized Service Provider within 30 days after the product fails to comply with specifications. [. . . ]