User manual TOSHIBA IK-TU48P

[. . . ] In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] In such a case, try to change the location of the camera or the cable wiring. (Moire When thin stripe patterns are shot, stripe patterns that are not actually there (moire) may appears as interference stripes. (Operating ambient temperature and humidity. Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality will lower and internal parts may be damaged. Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, depending on the conditions of the object and the camera (for example when the gain is increased), noise in the form of vertical strips or white dots may occur. Keep the protection cap away from children. Children may put them into mouth or swallow them accidentally. The protection cap protects the image sensing plane when the lens is removed from the camera, do not throw away. (When not using the camera for a longtime. Referring to the items "7. 2 (3) WHT BAL (White balance), 7. MODE SETTING BY ON SCREEN DISPLAY", select the desired mode. AWB *Automatic White Balance* * Adjust white balance by displaying the white object inside the area set by AWB menu and pressing the [DATA UP] button. When the shutter mode is EXT TRIG, AWB is not available. MANUAL *Manual White Balance* * Adjust the white balance manually using the WHT BAL menu while shooting the white object. Adjustment is performed by confirming with a waveform monitor. Outline Notes AWB(Automatic white balance) * Set the MODE to AWB on the WHT BAL menu. Perform the C. TEMP (color temperature conversion) setting, if necessary. (Refer to the item "7. 2 (3) WHT BAL (White balance)". ) 3200K*Appropriate for indoor shooting. * If the index menu/menu is displayed, press the [DISP] button to disable the color bar pattern or the character display on the menu. * Shoot a known white object that fills the screen and push [DATA UP] button for approx. * The character AWB blinks on the screen when the AWB starts. [. . . ] These limited warranties extend to the Original End-User ("Your[r]"). Limited One (1) Year Warranty of Labor and Parts ISD warrants this product and parts against defects in material or workmanship for a period of one year from the date of original retail purchase by the end-user. During this period, ISD will repair or replace a defective product or part with a new or refurbished item. The user must deliver the entire product to an ISD authorized service center. [. . . ]