User manual TOSHIBA M456

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear or bottom of the cabinet. The symbol for CLASS ll (Double Insulation) 16. Do not use a cracked , deformed, or repaired disc. [. . . ] "Off": Outputs the standard 8 bit colour. Sets the resolution for the component output picture. Progressive Mode 480i/576i 480p/576p 720p 1080i Auto Video Still Mode Auto Field Frame Audio BD Audio Mode Mix Audio Output HD Audio Output "Auto": The progressive mode will detect 24-frame film material (movies) and automatically select appropriate progressive mode. "Video": Suited for playing back video material discs (TV shows or animation). Adjusts picture resolution and quality in still mode. "Auto": Automatically selects the best resolution setting ("Frame" or "Field") based on the data characteristics of the pictures. "Field": Stabilises the pictures, although the picture quality may become coarse due to the limited amount of data. Select "Field" when the pictures are still unstable even if "Auto" is selected. "Frame": Displays relatively motionless pictures in higher resolution. "Frame" improves the picture quality, although it may unstabilise the pictures due to alternate output of 2-field data. · An individual picture on the TV screen is called "Frame", which consists of two separate images called "Field". Some pictures may be blurred at the auto setting in "Still Mode" setting due to their data characteristics. Surround (Default Use [s / B] to change the setting. 3. 0m) Back Default "Bitstream": Digital Bitstream Sets the audio format When playing back discs output from DIGITAL OUT Out LPCM recorded in Dolby Digital, jack. Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output. "LPCM": LPCM signal will be output from DIGITAL OUT jack. CONNECTIONS PLAYBACK FUNCTION SETUP Custom OTHERS Audio Mute · Refer to "Digital Out" setting on page 34 for setting options. EN 29 E5RJ0BD_EN. book Page 30 Tuesday, October 20, 2009 3:53 PM FUNCTION SETUP Category Audio Down Sampling Menus / Options On Off Description Sets the digital audio output when playing back BD or DVD recorded in LPCM. "On": LPCM signals are converted to 48 kHz for output. Set to "On" when using digital connections to an AV amplifier that is not compatible with sampling frequencies of 96 kHz. "Off": For BD and DVD recorded in LPCM without copyright protection, 2-channel audio signals up to 192 kHz are output as LPCM signals with no conversion. Sets whether to compress the range of sound volume (dynamic range control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back. All Age Setting All 8 to 1 Password input field Sets the rating level for the disc playback. Sets the rating level for the disc playback. Auto On Off Password input field BD Rating Parental · Refer to Level page 35 for DVD Rating more Level information. DRC Others Angle Icon Auto Power Off Panel Display DivX® VOD Password Change On Off On Off Auto Bright Dimmer Registration Your registration code is : Code To learn more visit www. divx. com/vod Sets the new password for "Parental" setting. HDMI CEC · This feature is available only when the display device is connected with an HDMI cable, and when it supports HDMI CEC feature. [. . . ] We don't promise that this software works. (But if you find any bugs, please let us know!) 2. You can use this software for whatever you want. You may not pretend that you wrote this software. [. . . ]