User manual TOSHIBA M461

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. Laser Safety This unit employs a laser. [. . . ] HDD to DVD / DVD to HDD / HDD to VHS / DVD to VHS Recording 3 Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. (Refer to "VHS to HDD / DVD" on page 44. ) e. g. ) HDD A DVD Dubbing One-Title Dubbing between HDD and DVD Video VR Playback HDD DVD-RW DVD-RW DVD-R DVD+RW DVD+R This function lets you select one specific title from the title list for dubbing. HDD DVD HDD VCR DVD VCR DVD HDD VCR HDD VCR DVD Editing If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first. 4 Select "Add" using [K \ L], then press [ENTER\OK]. HDD DVD 1 2 3 Press [TOP MENU]. Select a desired title to be dubbed using [K \ L \ 0 \ 1], then press [ENTER\OK]. Select "Dubbing" using [K \ L], then press [ENTER\OK]. e. g. ) HDD Original Resume Playback Play From Start Edit Title Delete Add to Playlist Delete Multiple Titles Dubbing Function Setup 3000 MB Dubbing List Add Delete All Dubbing Start VHS Functions 1/1 · If you have registered any dubbing before, they will be listed in the dubbing title list. 4 Select "Yes" using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No 5 Select a desired title using [K \ L \ 0 \ 1], then press [ENTER\OK]. The title is now registered in the dubbing list. To cancel selected title: Select a title using [K \ L \ 0 \ 1], then press [ENTER\OK] again. Others Dubbing of the selected title will start. To stop the dubbing in progress: Press [STOP C] on the front panel. Press [STOP C] for 2 seconds on the remote control. EN 43 E3TK7FD_EN. book Page 44 Wednesday, February 17, 2010 8:18 PM 6 Repeat step 5 until you register all the titles to be dubbed, then press [DUBBING]. e. g. ) HDD ORG 9 Select "Yes" using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No Title List 22 SP 17/ 05/ 10 07:00 22 SP 07:00 (00:30:00) 17/05/10 If dubbing continues when timer recording starts, the next display will appear. 3 Timer Recording is in standby. Yes No 2 1 1 2 4 New 5 1 6 Press `DUBBING' to confirm. 1/6 To delete a title: 1) Go to the dubbing list, then select a title using [K \ L]. SP LP Confirmation message will appear. · Depending on the dubbing direction, the available recording mode varies. · When dubbing from HDD to DVD, you can select "High" to perform the high speed dubbing (refer to "Recording Mode for Dubbing" on page 41 for more details). 44 EN E3TK7FD_EN. book Page 45 Wednesday, February 17, 2010 8:18 PM Setting a Disc to Protect VR To cancel finalising (DVD-RW disc only): At step 4, press [STOP C]. Select "Yes" using [K \ L], then press [ENTER\OK]. Finalising is cancelled and the unit switches to stop mode. Introduction DVD-RW DVD+RW DVD+R To prevent accidental over-recording, editing or erasing of recordings, you can protect them using "Setup" menu. Insert a recordable disc. 1 In stop mode, press [SETUP]. Do you want to cancel?Yes No Connections 2 3 4 5 Select "DVD Menu" using [K \ L], then press [ENTER\OK]. Select "Disc Protect OFF A ON" using [K \ L], then press [ENTER\OK]. Select "Yes" using [K \ L], then press [ENTER\OK]. The disc is protected. Finalising 10% If " " appears when [STOP C] is pressed, you cannot cancel finalising because the finalising has already reached at a critical point in its process. If "No" is selected and [ENTER\OK] or [RETURN] is pressed, finalising is continued. You cannot cancel finalising a DVD-R and DVD+RW/+R disc once it has started. Basic Setup / TV View Operation Press [SETUP] to exit. Note · The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted. [. . . ] · You are trying to record onto the DVD-RW / -R disc on which the number of recorded titles has reached the maximum (99). · You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999). · You are trying to record onto the DVD+RW/+R disc on which the number of recording titles comes up to the maximum (49). · You are trying to record onto the DVD+RW disc on which the number of recording chapters comes up to the maximum (254). [. . . ]