User manual TOSHIBA M472

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. Laser Safety This unit employs a laser. Only a qualified service personnel should remove the cover or attempt to service this unit, due to the possibility of eye injury. [. . . ] 1 In stop mode, press [SETUP]. Do you want to cancel?Yes No 2 3 4 5 Select "DVD Menu" using [K \ L], then press [ENTER\OK]. Select "Disc Protect OFF A ON" using [K \ L], then press [ENTER\OK]. Select "Yes" using [K \ L], then press [ENTER\OK]. The disc is protected. Finalising 10% If " " appears when [STOP C] is pressed, you cannot cancel finalising because the finalising has already reached at a critical point in its process. If "No" is selected and [ENTER\OK] or [RETURN] is pressed, finalising is continued. You cannot cancel finalising a DVD-R and DVD+RW/+R disc once it has started. Press [SETUP] to exit. Note · The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted. · You can select only "Disc Protect ON A OFF" when a protected disc is inserted. To cancel the disc protect: · Select "Disc Protect ON A OFF" at step 3, then select "Yes". · If you insert a disc protected with this unit, "Disc Protect ON A OFF" will appear instead of "OFF A ON". 5 Finalising is complete. Note · Finalising a disc in video mode and +VR mode automatically creates a Title menu. · After you finalise the DVD+RW disc, you can call up the title list by pressing [TOP MENU], or you can call up the Title menu by pressing [DISC MENU]. · Even after DVD+RW disc is finalised, you can still record or edit. · You can resume playback from where you stopped playing back the disc (Resume playback). · You can also start playback by pressing [PLAY B] instead of [ENTER\OK] at steps 7 and 8. · Some discs may start playback automatically. Connections Basic Setup / TV View Operation Title 1 Title 2 Playing Back a DVD-V / Video CD (without PBC Function) Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 DVD-V VCD Recording 1 Playing Back a DVD-RW / DVD-R / DVD+RW / DVD+R Disc Video VR Follow steps 1 to 5 in "Playing Back a DVD-RW / DVD-R / DVD+RW / DVD+R Disc" on this page. Press [PLAY B] to start playback. Playback will start. If you play back a DVD-video, a disc menu may appear. See page 46 for details. 2 DVD-RW DVD-RW DVD-R DVD+RW DVD+R 1 2 3 4 Playback Press [B ON\STANDBY] to turn on the unit. Turn on the TV and be sure to select the input to which the unit is connected. 3 Press [STOP C] to stop playback. Press [DVD]. Press [OPEN\CLOSE A] to open the disc tray. Place the disc on the disc tray with its label facing up. Be sure to align the disc with the disc tray guide. Note · Some discs may start playback automatically. · For playing back a video CD with PBC function, see page 47. Editing Playing Back an Audio CD or a Disc with MP3 / JPEG / DivX® Files CD MP3 JPEG DivX ® 1 Disc tray guide Follow steps 1 to 5 in "Playing Back a DVD-RW / DVD-R / DVD+RW / DVD+R Disc" on this page. If you want to play back an audio CD or a disc with a single file type (e. g. , a disc containing MP3 files only), skip to step 4. [. . . ] (See page 42. ) 76 EN E9TK2FD_EN. book Page 77 Wednesday, July 29, 2009 12:16 PM Introduction Error message Recording Error Disc is full. (No area for new recording) Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record more than 49 titles on one disc. [. . . ]