User manual TOSHIBA M66

[. . . ] 27 Setting the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Digital settings ­ other features . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Selecting favourite programmes . . . . . . . . . . . . . . . . . . . . . [. . . ] The television will return to factory settings and then auto tune. a b In the SETUP MENU press u until Reset TV is highlighted. A screen will appear warning that all digital settings will be lost, press Q to continue. The Welcome screen will appear, press Q to continue, the television will then auto tune. 29 00GB_M66D_EngOM. book Page 30 Wednesday, November 28, 2007 2:36 PM CONTROLS AND FEATURES Digital settings ­ software upgrade Version This feature can be used to check the version of software currently installed. Searching for new software If preferred, software upgrades can be searched for manually using Search for New Software. a In the SOFTWARE UPGRADE menu press U or u to select Search for New Software. SOFTWARE UPGRADE Version Auto upgrade Search for New Software MENU Back EXIT Watch TV 0. 5 OFF OK a From the FEATURE MENU press U or u to select Software upgrade. Press Q. FEATURE MENU Favourite and Locked Programmes Favourites Common Interface Slot Software Upgrade Encrypted Programmes MENU Back EXIT Watch TV OFF OK ALL PROGS NO MODULE OK b Press Q. The television will automatically start searching for a software upgrade, the progress bar will move along the line. SEARCHING FOR NEW SOFTWARE Searching for a new software upgrade for this TV. Searching b Press U or u to select Version. When the software has been updated there will be a choice of two versions available. SOFTWARE UPGRADE Version Auto upgrade Search for New Software MENU Back EXIT Watch TV 0. 5 ON OK EXIT Stop If an upgrade is found the television will automatically start downloading, if not a screen will appear stating that an upgrade is unavailable. NO UPGRADE AVAILABLE !There is no upgrade available at this time. Continue Auto Upgrade If Auto upgrade is selected the software will automatically update as each version becomes available, provided the television is on or in standby. If the television is on, a screen prompt will appear showing the software download taking place. a b In the SOFTWARE UPGRADE menu press U or u to select Auto upgrade. Use I or i to select ON or OFF. 30 00GB_M66D_EngOM. book Page 31 Wednesday, November 28, 2007 2:36 PM CONTROLS AND FEATURES Input selection and AV connections Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. If Q is not pressed the selection will be forgotten when text is cancelled. Other pages may be viewed by entering the 3 digit page number ­ but DO NOT press Q or these pages will be stored. Back Watch TV Text information The button: To view text services press . Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. Programmes cannot be changed until text is cancelled. The first text page shown will be the initial page. Any text page can be accessed by entering the 3 digit page number using the numbered buttons, pressing the coloured buttons or pressing > to advance to the next page and < to go back to the previous page. NOTE: While viewing text services, the on-screen menu will not appear when you press M. Sub-pages If there are sub-pages they will automatically load into memory without changing the page on screen. To access the sub-pages press l then use > and < to view them. A bar with numbers will appear on the side of the screen. The sub-page you are viewing will be highlighted and, as the television loads any additional sub-pages the colour of the numbers will change, indicating that these pages have been loaded. [. . . ] If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. [. . . ]