User manual TOSHIBA MAGNIA 3100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA MAGNIA 3100. We hope that this TOSHIBA MAGNIA 3100 user guide will be useful to you.
Lastmanuals help download the user guide TOSHIBA MAGNIA 3100.
Manual abstract: user guide TOSHIBA MAGNIA 3100
Detailed instructions for use are in the User's Guide.
[. . . ] Remove two M2. 5x4 black screws securing the memory cover. Lift out the memory slot cover.
Memory clips 4. Spread the memory clips outward and pull the memory module out of the connector on a 45 degree angle.
MODEM BOARD REMOVAL
M2x4 silver screws Modem harness Modem slot cover
M2. 5x4 black screw 1. Remove one M2. 5x4 black screw securing the modem slot cover. [. . . ] Remove one M2. 5x6 black screw securing HDD cover. Unfold the plastic tab and pull to remove the HDD from the bay.
HDD REMOVAL
HDD bracket
KEYBOARD REMOVAL
HDD
M3x4 brass flat head screws M2. 5x12 black screws 1. Remove two M2. 5x12 black screws securing the keyboard holder.
5. Remove two M3x4 brass flat head screws securing the HDD to the bracket and remove the HDDbracket.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite TE2000
KEYBOARD REMOVAL
Latch
TM
Keyboard Keyboard lock
Keyboard holder 1. Turn the computer right side up and open the display panel. Using the case separator, unlatch the keyboard holder at the top of the keyboard.
M2. 5x2. 6 black screws 3. Remove one M2. 5x2. 6 black screws securing the keyboard. Slide the keyboard lock upward to release the keyboard.
KEYBOARD REMOVAL
Keyboard
WIRELESS LAN CARD REMOVAL
Keyboard cable
PJ445
Mini PCI cover 5. Lift out the keyboard and set it as shown above. Disconnect the keyboard cable from PJ445 on the system board.
M2. 5x4 security torx screw
1. Remove one M2x4 security torx screw securing the mini PCI cover and lift out the cover.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite TE2000
WIRELESS LAN CARD REMOVAL
TM
TOP COVER REMOVAL
M2. 5x6 silver screws M2. 5x4 black flat head screw
Mini-PCI connector clips Wireless LAN card
M2. 5x12 black screws White coax cable Black coax cable M2. 5x20 black screws 1. Remove one M2. 5x4 black flat head screws securing the power supply board. Disconnect the power supply board from the system board.
Power supply board
SYSTEM BOARD REMOVAL
M2. 5x4 black flat head screw SD/Sound board 1. Disconnect the sound interface cable from PJ103 and the SD interface cable from PJ150 on the SD/Sound board. Remove one M2. 5x4 black flat head screw securing the SD/Sound board. PJ803
HDD guide assy Select bay cover SD interface cable Sound interface cable M2. 5x4 black flat head screws
M2. 5x6 black flat head screws 1. Remove one M2. 5x6 black flat head screw securing the HDD guide assembly and lift out the HDD guide assembly. Remove three M2. 5x6 black flat head screws securing the select bay cover and lift out the select bay cover.
DC-IN jack harness
3. Disconnect the following cables from the system board: -Sound interface cable from PJ103 -SD interface cable from PJ150 -DC-IN jack harness from PJ803 4. Remove three M2. 5x4 black flat head screws securing the system board. Lift out the system board.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite TE2000
MEMBRANE SWITCH REMOVAL
TM
SPEAKERS REMOVAL
Membrane switch assy
Left and right speakers
M2. 5x4 black flat head screws 1. Remove three M2. 5x4 black flat head screws securing the membrane switch. [. . . ] Remove two M2. 5x4 black flat head screws securing the left and right speakers. Lift out the speakers.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite TE2000
14. 1" DISPLAY MASK REMOVAL
Rubber seals
TM
FL INVERTER AND 14. 1" LCD REMOVAL
M2x5 silver screws
LCD module assy
M2x3 silver screws
M2x3 silver screws
Mask seals
1. Remove two mask seals and four rubber seals on the display mask using a pair of fine-tipped tweezers. Remove two M2. 5x6 black screws and four M2x5 silver flat head screws securing the display mask. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA MAGNIA 3100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA MAGNIA 3100 will begin.
