User manual TOSHIBA MAGNIA 3300
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA MAGNIA 3300. We hope that this TOSHIBA MAGNIA 3300 user guide will be useful to you.
Lastmanuals help download the user guide TOSHIBA MAGNIA 3300.
Manual abstract: user guide TOSHIBA MAGNIA 3300
Detailed instructions for use are in the User's Guide.
[. . . ] Lift out the cover.
MEMORY MODULE REMOVAL
MINI PCI CARD REMOVAL
Mini PCI slot cover
Memory module
Memory clips 4. Gently press out on the memory clips and pull the memory module out of the connector on a 45 degree angle.
M2. 5x4 black torx screws 1. Remove two M2. 5x4 black torx screws securing the Mini PCI slot cover.
Tough Enough for Today's World
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite 5000 Series
MINI PCI CARD REMOVAL MODEM BOARD REMOVAL
TM
Mini PCI card
PCI clips 3. Gently press out the Mini PCI slot clips and pull the Mini PCI card out of the connector on a 30 degree angle.
Modem slot cover
M2. 5x4 black flat head screws
1. [. . . ] Turn the computer upside down and remove the following sixteen screws: - 6 M2. 5x16 black screws - 2 M2. 5x25 black screws - 5 M2. 5x6 black flat head screws - 2 M2x3 black screws - 1 M2. 5x4 black flat head screw
M2x6 brass screws
KB plate assembly
2. Turn the computer right side up and open the LCD panel. Remove one M2x4 brass screw securing the KB plate and lift out the KB plate. Remove two M2. 5x16 black screws and two M2x6 brass screws securing the top cover.
Tough Enough for Today's World
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite 5000 Series
TOP COVER REMOVAL
Left/right speaker Membrane switch PJ103 PJ120 PJ121 Interface cable PJ124 PJ203 PJ204 PJ114 PJ106 CD-R/W/DV-ROM drive 1. Slide the CD-R/W/DVD-ROM drive to the right to disconnect it from PJ106 on the system board.
TM
CD-R/W/DVD-ROM DRIVE REMOVAL
CD control/touchpad cable LCD/FL cable 1. Disconnect the power/internet/in-touch cover sensor membrane switch from PJ103, the left and right speaker cables from PJ120 and PJ121 on the system board. Disconnect the LCD/FL cable from PJ203 and PJ204 on the video board. Disconnect the interface cable and the CD control/ touch pad cable from PJ124 and PJ114 on the system board.
CD-R/W//DVD-ROM DRIVE REMOVAL
CD-R/W/DVD-ROM connector CD-R/W/DVD-ROM drive
SPEAKER(WOOFER) REMOVAL
Speaker (woofer)
M2x6 brass screws CD-R/W/DVD-ROM bracket
M2x3 black screw CD-R/W/DVD-ROMside bracket woofer harness Glass tape PJ1106
2. Remove one M2x3 black screw securing the side bracket and lift out the bracket. Remove two M2x6 brass screws securing the CD-R/W/ DVD-ROM connector and the bracket. Remove the connector and the bracket.
1. Please refer to FSB-200112 for the complete procedures on how to apply the silicone grease. Disconnect the DC-IN harness from PJ800 on the system board and remove it. Disconnect the sound cable from PJ119 on the system board. Disconnect the battery harness from PJ820 and PJ821 on the system board.
Tough Enough for Today's World
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite 5000 Series
SYSTEM BOARD REMOVAL
M2. 5x4 flat head black screw
TM
TOUCHPAD REMOVAL
M2x4 brass screws M2x4 brass screw
Touchpad PCB
4. Remove one M2x4 brass screw and one M2. 5x4 flat head black screw securing the system board. Lift out the system board.
Touchpad cable 1. Disconnect the touchpad cable from the touchpad PCB. Remove four M2x4 brass screws securing the touchpad assembly. Lift out the touchpad PCB.
INTERFACE BOARD REMOVAL
Interface cable Touchpad cable PJ15 PJ10 PJ13 PJ12 Sub LCD power harness Sub LCD cable
CD CONTROL/SUB LCD REMOVAL
Button holder
Interface board
M2x4 brass screw
1. Disconnect the touchpad cable from PJ15, the interface cable from PJ10, the sub LCD cable from PJ13 and the sub LCD power harness from PJ12. Remove one M2x4 brass screw securing the interface board. [. . . ] Peel off the glass tapes and mylar tapes securing the left and right speaker cables. Remove two M2x6 brass screws securing the left and right speakers.
Left and Right speaker covers 3. Remove the left and right speaker covers and lift out the speakers.
Tough Enough for Today's World
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite 5000 Series
15" DISPLAY MASK REMOVAL
Latch
TM
FL INVERTER AND 15" LCD REMOVAL
LCD module
Display mask
Mask seals
Mask seals
LCD
M2x5 brass screws
M2x5 brass screws
FL cable
Mask seals 1. Remove two mask seals at the bottom corners of the display assembly using a pair of fine-tipped tweezers. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA MAGNIA 3300
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA MAGNIA 3300 will begin.
