User manual TOSHIBA MEA210

[. . . ] Introduction DIGITAL AUDIO PLAYER MEA210 OWNER'S MANUAL Preparation Audio data preparation Operation Others © 2001 TOSHIBA CORPORATION XZ2029P012 Introduction Introduction Product Name : DIGITAL AUDIO PLAYER Model Number(s) : MEA210 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] An SD memory card may become incapable of writing or deleting after a prolonged period of use. An unformatted SD memory card can not be used. This player can format the SD memory card. (page 38) Recommended SD memory card TOSHIBA SD memory card SD-M3201M (32MB), SD-M6401M (64MB), SD-M1280M (128MB) Preparation 19 Audio data preparation Using the TOSHIBA Audio Manager Launching the TOSHIBA AUDIO Manager Choose "Audio Manager" from the start menu. Audio data preparation The following window (player window) appears. When you launch the "Audio Manager" for the first time, a message to input user ID appears. Input the user ID number, which is specified by a label on the cover of the English Owner's manual. (Player window) LIBRARY MANAGER Wizard Close (to quit the TOSHIBA Audio Manager) Online help If you have any questions or problems, refer to the online help of the TOSHIBA Audio Manager. 20 Procedures for importing and transferring audio data Audio CD data Audio file (MP3, WAVE) data "Importing audio data from an audio CD" (page 23) "Importing audio file" (page 25) "Transferring audio data to the player" (page 26) "Transferring audio data to the player" (page 26) Using Wizard "Using Wizard to import/transfer audio data" (page 22) Audio data preparation Notes on the TOSHIBA Audio Manager · Display requirement Use the TOSHIBA Audio Manager on a computer with a color monitor with resolution greater than 800 x 600 and more than 65536 color capacity. If color resolution is less than 800 x 600, windows of the program will be displayed outside the visible screen area. · Drive assignment A computer will recognize this player as a new drive when connected, and assign it the first available position. However, if the last position is occupied by a network drive, a computer will not assign the player the first vacant position, but instead to last position, thereby voiding the network drive position. Assign your network drive a position that does not include the player. · If you cannot click a window of TOSHIBA Audio Manager, your system may be running short of available application memory. · Refer to the README. TXT for CD-ROM drives on which the TOSHIBA Audio Manager has been approved to run. If you use a CD-ROM drive not included there, the TOSHIBA Audio Manager may not import audio data directly. In this case, encode audio data from the analog input device on your computer into an WAVE file using software commercially available on market, then import it into the TOSHIBA Audio Manager. 21 Audio data preparation Using Wizard to import/transfer audio data Following the instructions in the window, you can import audio data from an audio CD and transfer it to the player or an SD memory card. Launch the TOSHIBA Audio Manager. Click on the player window. The Audio Manager Wizard window appears. Audio data preparation Click the button you want to operate. Each Wizard window appears. Copy music from audio CDs: To import audio data from an audio CD. You can also transfer audio data to the player or SD memory card at the same time. Copy audio files: To import data from audio file. You can also transfer data to the player or SD memory card at the same time. Transfer audio data: To transfer audio data to the player or SD memory card at the same time. Edit PlayLists: To edit the PlayList or create a new one. Follow the instructions on the window. Note If you want to import or transfer audio data in the LIBRARY MANAGER window but not included in the Wizard window, refer to page 23 to page 30. 22 Audio data preparation Importing audio data from an audio CD This section explains how to import audio data from an audio CD. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]