User manual TOSHIBA PORTEGE 3500 TABLET PC

[. . . ] Portégé® 3500/3505 Series User's Guide If you need assistance: InTouch® Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see "If Something Goes Wrong" on page 175. TOSHIBA C6632-0902M1 2 Model: Portégé 3500/3505 Series Compact Disk-ReWritable The computer system you purchased may include a Compact DiskReWritable (CD-RW), one of the most advanced storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed. If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS ("TOSHIBA"), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. [. . . ] See the documentation supplied with the device for additional configuration steps. TECHNICAL NOTE: In order to use the simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 640 X 480 or higher. 106 Expansion Options Using tablet mode Display limitations Keep in mind that the quality of the display will be limited to the capabilities of the external video device. If the external video device, such as an SVGA monitor, is capable of displaying at a maximum resolution of 640 x 480 and your system is set for a higher resolution, only part of the desktop will appear on the screen. You can view the "lost" area by scrolling to it. If you use the display hot key (Fn + F5) to change the display output with the LCD Display Stretch option enabled and the Display area (resolution) set to 640 x 480 or 800 x 600, the image on the internal display panel may appear stretched. Using tablet mode One of your computer's features is a convertible display that allows you to use the screen much as you would a writing tablet. Your computer came with applications already installed specifically designed to work with the tablet feature of the system. For more information on those applications, see the documentation provided with them. Preparing to use the tablet 1 2 Press the display panel release button and lift the display panel. Press and hold in the power button until the on/off light on the system indicator panel glows green--about one second. Expansion Options Using tablet mode 107 3 Rotate the display panel clockwise 180o (degrees). When you complete this task, the screen faces away from the keyboard. CAUTION: When rotating LCD screen of your computer, be sure to slowly turn the screen in the proper direction, and not apply excessive force or speed. Rotating the display panel clockwise 180o 4 5 Flip the display latch so it points toward the back of the LCD screen. Fold the display panel down flat over the keyboard. The display latch will click and lock the screen in tablet position. 108 Expansion Options Using tablet mode Display latch Folding the display panel down flat By default, the computer desktop will automatically rotate to primary portrait view. For more information on changing tablet screen settings, see "The Toshiba Rotation Utility" on page 162. Using tablet mode 1 Press the dimple at the bottom of the Toshiba tablet pen to remove it from the slot at the edge of the display panel. Removing the Toshiba tablet pen from the slot on the tablet Expansion Options Using tablet mode 109 2 Use the Toshiba tablet pen on the tablet as you would any pointing device or pen. Writing on the tablet After placing the screen in tablet mode, be sure to calibrate the screen using the Tablet and Pen Settings screen. To open Tablet and Pen Settings through the Control Panel: 1 2 3 Click Start, and select Control Panel. The Tablet and Pen Settings screen appears. 110 Expansion Options Using tablet mode Sample Tablet and Pen Settings screen 4 Click the Calibrate. . . button on the Settings tab (the default tab displayed), and follow the on-screen instructions. Click OK. 5 To open the Tablet and Pen Settings screen through the TOSHIBA Console: 1 2 Click Start, then point to All Programs. Point to TOSHIBA Console, then click TOSHIBA Console selection. 3 4 Click the Table and Pen Settings icon. The Tablet and Pen Settings screen appears. button on the Settings tab (the default tab displayed), and follow the on-screen instructions. Click OK. 5 Expansion Options Using tablet mode 111 To learn how to manually change the layout of the screen from portrait to landscape, see "The Toshiba Rotation Utility" on page 162. [. . . ] The RJ11 connector is a 6wire connector. ROM (read-only memory) -- Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer's BIOS, which is essential instructions the computer reads when you start it up. [. . . ]