User manual TOSHIBA PROTEGE P2000 FIELD REPLACEABLE UNIT DOCUMENTATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA PROTEGE P2000. We hope that this TOSHIBA PROTEGE P2000 user guide will be useful to you.
Lastmanuals help download the user guide TOSHIBA PROTEGE P2000.
Manual abstract: user guide TOSHIBA PROTEGE P2000FIELD REPLACEABLE UNIT DOCUMENTATION
Detailed instructions for use are in the User's Guide.
[. . . ] Remove two M2x4 black screws securing the HDD cover and lift it out.
HDD connector HDD assembly 3. Lift up the rubber handle and hold the HDD assembly as shown above. [. . . ] Separate the top cover from the bottom cover.
MINI PCI CARD REMOVAL
White mini coax
Mini PCIcard interface adaptor
Mini PCI connector clips
Wireless LAN card 1. Disconnect the Mini PCI card interface adaptor from the system board. Carefully lift up the Mini PCI card interface adaptor and turn it over as shown on the next picture.
Black mini coax 3. Disconnect the black and white mini coax from the Mini PCI wireless LAN card. Spread the mini PCI connector clips and pull the wireless LAN card out of the connector about 30 degrees.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege P2000 Series
RTC REMOVAL SPEAKER REMOVAL
TM
Glass Tape PJ10
RTC battery
RTC harness PJ790 1. Peel off two strips of glass tape securing the RTC cable. Disconnect the RTC harness from PJ790 and lift it out.
Speaker Speaker harness Rubber holder 1. Disconnect the speaker harness from PJ10 on the system board. Lift out the speaker and separate the rubber holder.
MODEM BOARD REMOVAL
Modem board
SOUND JACK BOARD REMOVAL
Modem harness Guide pins
HDD/modem interface board M2x4 brass screws 1. Disconnect the modem harness from the modem board. Remove two M2x4 brass screws securing the modem board to the HDD/Modem interface board. Disconnect the modem board from PJ3 on the HDD/modem board Sound jack board 1. Lift up the sound jack board to free it from the guide pins and pull it out. Turn the board over as shown on the next picture.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege P2000 Series
SOUND JACK BOARD REMOVAL
LAN harness PJ352 Sound jack cable
TM
SYSTEM BOARD REMOVAL
Sound jack board PJ999 3. [. . . ] Remove one LCD cushions and six LCD mask seals using a pair of fine-tipped tweezers. Remove one M2x3 black flat head screw and six M2x3 silver flat head screws securing the display mask. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA PROTEGE P2000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA PROTEGE P2000 will begin.
